Mechanical and Manufacturing Engineering

Biographical Details:

Graduated from Damascus Univerisity in 1984, then working for 4 years in R&D,between 1889 and 1990 working on research project leading to Master degree-Dublin, between 1990-1993 working on research project leading to PhD degree-Dublin, between 1994-1998 lecturing at HIAST (Higher Instituate of Applied science and Technology)-Damascus, 1999-2002 working at the research centre of FIAT on the development of new generation of feeding and injection component.From Oct. 2002 working at DCU.

Research Interests:

Sustainable Energy and Transportation, CAD and Design Sustainable Energy includes: Hydrogen & Fuel Cell, Bio-Fuel, Wind and Solar Energy. Transportation includes: Implementing Smart materials Concept "MRF(Magnetic Rheology Fluid) and Magnetostrictive materials for automotive components. Implementing Laser Welding/Cutting for Vehicles.

Selected Peer Reviewed Journals

• Ismail, I., Mazlan, S.A., Zamzuri, H., Olabi, A.G.. 2012. Investigation of mechanical performance of squeezed magnetorheological fluid using response surface method. Advanced Materials Research, 445,, pp542-547.
• D. Russo, M. Dassisti, V. Lawlor, A.G. Olabi. 2012. State of the art of biofuels from pure plant oil. Renewable & Sustainable Energy Reviews, 16, 6, pp4056-4070.
• Rahman, M.M., Olabi, A.G., Hashmi, M.S.J.. 2012. Finite element modelling of rheological property of curing PMMA bone cement. Part 2 effect of bone cement amount. Journal Of Biomimetics, Biomaterials, And Tissue Engineering, 13, 1-2, pp69-73.
• Eltawahni, H.A., Hagino, M., Benyounis, K.Y., Inoue, T., Olabi, A.G. 2012. Effect of CO2 laser cutting process parameters on edge quality and operating cost of AISI316L. Optics And Laser Technology, 44, 4, pp1068-1082.
• Ismail, I., Mazlan, S.A., Zamzuri, H., Olabi, A.G.. 2012. Fluid-particle separation of magnetorheological fluid in squeeze mode. Japanese Journal Of Applied Physics Part 1, 51, 6
• A.G. Olabi. 2012. Developments in sustainable energy and environmental protection. Energy, 39, 1, pp2-5.
• Carton, J.G., Lawlor, V., Olabi, A.G., Hochenauer, C., Zauner, G. 2012. Water droplet accumulation and motion in PEM (Proton Exchange Membrane) fuel cell mini-channels. Energy, 39, 1, pp63-73.
• M. Sajjia, K.Y. Benyounis, A.G. Olabi. 2012. The simulation and optimization of heat treatment of cobalt ferrite nanoparticles prepared by the sol¿gel technique. Powder Technology, 222,, pp143-151.
• Rossini, N.S., Dassisti, M., Benyounis, K.Y., Olabi, A.G.. 2012. Methods of measuring residual stresses in components. Materials And Design, 35,, pp572-588.
• Rahman, M.M., Olabi, A.G., Hashmi, M.S.J. 2012. Finite element modelling of rheological property of curing PMMA bone cement. Part 1 : Effect of prosthesis insertion velocity. Journal Of Biomimetics, Biomaterials, And Tissue Engineering, 12, 1-3, pp83-90.
• A. Alaswad, K.Y. Benyounis, A.G. Olabi. 2012. Tube hydroforming process: A reference guide. Materials And Design, 33,, pp328-339.
• Aly, M., Hashmi, M.S.J., Olabi, A.G., Messeiry, M., Abadir, E.F., Hussain, A.I.. 2012. Effect of colloidal nano-silica on the mechanical and physical behaviour of waste-glass cement mortar. Materials And Design, 33,, pp127-135.
• Abdul Ghani Olabi. 2011. Developments in sustainable energy and environmental protection. Simulation Modelling Practice And Theory, 19, 4, pp1139-1142.
• Alaswad, A., Benyounis, K.Y., Olabi, A.G.. 2011. Finite element comparison of single and bi-layered tube hydroforming processes. Simulation Modelling Practice And Theory, 19, 7, pp1584-1593.
• Alaswad, A., Benyounis, K.Y., Olabi, A.G.. 2011. Employment of finite element analysis and Response Surface Methodology to investigate the geometrical factors in T-type bi-layered tube hydroforming. Advances In Engineering Software, 42, 11, pp917-926.
• Alaswad, A., Olabi, A.G., Benyounis, K.. 2011. Employment of finite element modelling and design of experiments to investigate the geometrical factors in T-type bi-layered tube hydroforming. Key Engineering Materials, 473,, pp775-782.
• Lawlor, V., Hochenauer, C., Griesser, S., Zauner, G., Buchinger, G., Meissner, D., Olabi, A.G., Mariani, A.. 2011. The use of a high temperature wind tunnel for MT-SOFC testing-Part II: Use of computational fluid dynamics software in order to study previous measurements. 9, 6, pp061019-.
• Olabi, A.G., Alaswad, A.. 2011. Experimental and finite element investigation of formability and failures in bi-layered tube hydroforming. Advances In Engineering Software, 42, 10, pp815-820.
• Rehan, M., Coleman, J.E., Olabi, A.G.. 2011. Design, development and validation of a novel mechanical occlusion device for transcervical sterilization. Lecture Notes In Electrical Engineering, 90 LNEE,, pp609-622.
• Tamtam, A., Gallagher, F., Olabi, A.G., Naher, S. 2011. Higher education in Libya, system under stress. Procedia - Social And Behavioral Sciences, 29,
• M. Aly, M.S.J. Hashmi, A.G. Olabi, M. Messeiry, A.I. Hussain. 2011. Effect of nano clay particles on mechanical, thermal and physical behaviours of waste-glass cement mortars. Materials Science And Engineering A, 528, 27, pp7991-7998.
• H.Achour, J. Carton and A.G. Olabi. 2011. Estimating Vehicle Emission from Road Transport, case study: Dublin City. Applied Energy, 88, 5, pp1957-1964.
• H.A. Eltawahni, A.G. Olabi, K.Y. Benyounis. 2011. Investigating the CO2 laser cutting parameters of MDF wood composite material. Optics And Laser Technology, 43, 3, pp648-659.
• A. Alaswad, A.G. Olabi, K.Y. Benyounis. 2011. Integration of finite element analysis and design of experiments to analyse the geometrical factors in bi-layered tube hydroforming. Materials And Design, 32, 2, pp838-850.
• A. Ruggiero, L. Tricarico, A.G. Olabi, K.Y. Benyounis. 2011. Weld-bead profile and costs optimisation of the CO2 dissimilar laser welding process of low carbon steel and austenitic steel AISI316. Optics And Laser Technology, 43, 1, pp82-90.
• A. Clarke, T. Prescott, A. Khan, A.G. Olabi. 2010. Causes of breakage and disruption in a homogeniser. Applied Energy, 87, 12, pp3680-3690.
• A.G.Olabi. 2010. The 3rd international conference on sustainable energy and environmental protection SEEP 2009 ¿ Guest Editor¿s Introduction. Energy, 135, 12, pp4508-4509.
• J.G.Carton & A.G.Olabi. 2010. Wind/hydrogen hybrid systems: Opportunity for Ireland¿s wind resource to provide consistent sustainable energy supply. Energy, 135, 12, pp4536-4544.
• V.Lawlor, G.Zauner, C.Hochenauer, A.Mariani, S.Griesser, J.G.Carton, K.Klein, S.Kuehn, A.G.Olabi, S.Cordiner, D.Meissner, G.Buchinger. 2010. The Use of a High Temperature Wind Tunnel for MT-SOFC Testing¿Part I: Detailed Experimental Temperature Measurement of an MT-SOFC Using an Avant-Garde High Temperature Wind Tunnel and Various Measurement Techniques. 7, 6, pp061016-1-061016-7.
• H.A. Eltawahni, A.G. Olabi, K.Y. Benyounis. 2010. Effect of process parameters and optimization of CO2 laser cutting of ultra high-performance polyethylene. Materials And Design, 31, 8, pp4029-4038.
• M. Rehan, J. Coleman, A.G. Olabi. 2010. Delivery Actuator for a Transcervical Sterilization Device. Sensors And Actuators A-physical, 163, 1, pp343-355.
• M. Sajjia, M. Oubaha, T. Prescott, A.G. Olabi. 2010. Development of cobalt ferrite powder preparation employing the sol¿gel technique and its structural characterization. Journal Of Alloys And Compounds, 506, 1, pp400-406.
• I. Ismail, S.A. Mazlan, A.G. Olabi. 2010. Magnetic Circuit Simulation for Magnetorheological (MR) Fluids Testing Rig in Squeeze Mode. Advanced Materials Research, 123-125, , pp991-994.
• Rehan M., Coleman J., Olabi A.G. 2010. Novel implant for transcervical sterilization. Journal Of Bioscience And Bioengineering, 110, 2, pp242-249.
• J.G. Carton, A.G. Olabi. 2010. Design of experiment study of the parameters that affect performance of three flow plate configurations of a proton exchange membrane fuel cell. Energy, 35, 7, pp2796-2806.
• V. Lawlor, S. Griesser, G. Buchinger, A.G. Olabi, S. Cordiner, D. Meissner. 2010. Corrigendum to ¿Review of the micro-tubular solid oxide fuel cell: Part I. Stack design issues and research activities¿ [J. Power Sources 193/1 (2009) 387¿399]. Journal Of Power Sources, 195, 3
• E.M. Anawa, A.G. Olabi, F.A. Elshukri. 2009. Modeling and optimization of tensile shear strength of Titanium/Aluminum dissimilar welded component. Journal Of Physics : Conference Series, 181, 1
• Edmund Morris, A.G. Olabi, M.S.J. Hashmi. 2009. Experimental and numerical analysis of slotted tube systems under quasi-static loading. International Journal Of Computational Materials Science And Surface Engineering, 2, 1/2, pp137-145.
• K.Y. Benyounis, A.G. Olabi, M.S.J. Hashmi. 2009. Mechanical properties, weld bead and cost universal approach for CO2 laser welding process optimisation. International Journal Of Computational Materials Science And Surface Engineering, 1, 1/2, pp99-109.
• S.A. Mazlan, A. Issa, H.A. Chowdhury, A.G. Olabi. 2009. Magnetic circuit design for the squeeze mode experiments on magnetorheological fluids. Materials And Design, 30, 6, pp1985-1993.
• V. Lawlor, D. Meissner, C. Hochenauer, S. Griesser, S. Cordiner, A. Mariani, G. Zauner, A.G. Olabi, G.Buchinger. 2009. Micro-tubular SOFCs to measure the effects of cross flow on mass transfer rates around the perimeter of a cylindrical electrode. Ecs Transactions, 25, 2, pp1283-1293.
• V. Lawlor, S. Griesser, G. Buchinger, A.G. Olabi, S. Cordiner, D. Meissner. 2009. Review of the micro-tubular solid oxide fuel cell: Part I. Stack design issues and research activities. Journal Of Power Sources, 193, 2, pp387-399.
• H.A. Chowdhury, S.A. Mazlan, A.G. Olabi. 2009. A Simulation Study of Magnetostrictive Material Terfenol-D in Automotive CNG Fuel Injection Actuation. Solid State Phenomena, 154, , pp41-46.
• S.A. Mazlan, A. Issa, H.A. Chowdhury, A.G. Olabi. 2009. Tensile Stress-Strain Relationships of Magnetorheological Fluids under Various Factors. Solid State Phenomena, 154, , pp127-132.
• A. Rafferty, A.M. Alsebaie, A.G. Olabi, T. Prescott. 2009. Properties of zirconia-toughened-alumina prepared via powder processing and colloidal processing routes. Journal Of Colloid And Interface Science, 329, 2, pp310-315.
• A.G. Olabi and A. Grunwald. 2008. Design and application of magnetostrictive materials. Materials And Design, 29, 2, pp469-483.
• E.M. Anawa, A.G. Olabi, M.S.J. Hashmi. 2008. Application of Taguchi method to optimise dissimilar laser welded components. International Journal Of Manufacturing Technology And Management, 15, 2, pp219-227.
• M. Hasanuzzaman, A. Rafferty, A.G. Olabi, T. Prescott. 2008. Sintering and characterisation of nano-sized yttria-stabilised zirconia. International Journal Of Nanoparticles, 1, 1, pp50-65.
• M. Hasanuzzaman, A. Rafferty, A.G. Olabi, T. Prescott. 2008. Approach for sintering nano-sized yttria-stabilised zirconia. International Journal Of Nanomanufacturing, 1, 4, pp524-536.
• M.D. Islam, A.G. Olabi, M.S.J. Hashmi. 2008. Mechanical stresses in the multilayered T-branch hydroforming: numerical simulation. International Journal Of Manufacturing Technology And Management, 15, 2, pp238-245.
• Olabi A.G. and Grunwald A. 2008. Design of magneto-rheological (MR) valve. Sensors And Actuators A-physical, 148, 1, pp211-223.
• A.G. Olabi, A. Grunwald. 2008. Computation of magnetic field in an actuator. Simulation Modelling Practice And Theory, 16, 10, pp1728-1736.
• E.M. Anawa, A.G. Olabi. 2008. Control of welding residual stress for dissimilar laser welded materials. Journal Of Materials Processing Technology, 204, 1-3, pp22-33.
• E.M. Anawa, A.G. Olabi. 2008. Optimization of tensile strength of ferritic/austenitic laser-welded components. Optics And Lasers In Engineering, 46, 8, pp571-577.
• H.A. Chowdhury, S.A. Mazlan, A.G. Olabi. 2008. Implementation of Magnetostrictive Material Terfenol-D in CNG Fuel Injection Actuation. Advanced Materials Research, 47-50, , pp630-633.
• K.Y. Benyounis and A.G. Olabi. 2008. Optimization of different welding processes using statistical and numerical approaches ¿ A reference guide,. Advances In Engineering Software, 39, 6, pp483-496.
• S.A. Mazlan, A. Issa, A.G. Olabi. 2008. Magnetorheological Fluids Behaviour in Tension Loading Mode. Advanced Materials Research, 47-50, , pp242-245.
• A. Grunwald, A.G. Olabi. 2008. Design of a magnetostrictive (MS) actuator. Sensors And Actuators A-physical, 144, 1, pp161-175.
• S.A. Mazlan, N.B. Ekreem, A.G. Olabi. 2008. An investigation of the behaviour of magnetorheological fluids in compression mode. Journal Of Materials Processing Technology, 201, 1-3, pp780-785.
• S.A.Mazlan, N.B.Ekreem, A.G.Olabi. 2008. Apparent stress-strain relationships in experimental equipment where magnetorheological fluids operate under compression mode. Journal Of Physics D-applied Physics, 41, 9
• E.M. Anawa and A.G. Olabi. 2008. Using Taguchi method to optimize welding pool of dissimilar laser-welded components. Optics And Laser Technology, 40, 2, pp379-388.
• K.Y. Benyounis, A.G. Olabi and M.S.J. Hashmi. 2008. Multi-response optimization of CO2 laser-welding process of austenitic stainless steel. Optics And Laser Technology, 40, 1, pp76-87.
• A.G. Olabi, E. Morris, M.S.J. Hashmi and M.D. Gilchrist. 2008. Optimised design of nested oblong tube energy absorbers under lateral impact loading. International Journal Of Impact Engineering, 35, 1, pp10-26.
• A.G. Olabi, E. Morris, M.S.J. Hashmi and M.D. Gilchrist. 2008. Optimised design of nested circular tube energy absorbers under lateral impact loading. International Journal Of Mechanical Sciences, 50, 1, pp104-116.
• A.G. Olabi and A. Grunwald. 2007. Design and application of magneto-rheological fluid,. Materials And Design, 28, 10, pp2658-2664.
• A.G. Olabi, G. Casalino, K.Y. Benyounis and A. Rotondo. 2007. Minimisation of the residual stress in the heat affected zone by means of numerical methods. Materials And Design, 28, 8, pp2295-2302.
• G. Casalino, A. Olabi, N. Cipriani, A. Rotondo. 2007. Investigation on the residual stress of AISI 4047 low alloy steel laser welded. Key Engineering Materials, 344, , pp715-722.
• S.A.Mazlan, N.B.Ekreem, A.G.Olabi. 2007. The performance of magnetorheological fluid in squeeze mode. Smart Materials And Structures, 16, 5, pp1687-1682.
• E.M.Anawa and A.G.Olabi. 2007. The Application of the Hole Drilling Method to Define the Residual Stress of Dissimilar Laser Welded Components. Applied Mechanics And Materials, 7-8, , pp133-138.
• Edmund Morris, A.G. Olabi and M.S.J. Hashmi. 2007. Lateral crushing of circular and non-circular tube systems under quasi-static conditions. Journal Of Materials Processing Technology, 191, 1-3, pp132-135.
• K.Y. Benyounis, A.G. Olabi, J.H. Abboud. 2007. Assessment and Minimization of the Residual Stress in Dissimilar Laser Welding. Applied Mechanics And Materials, 7-8, , pp139-144.
• N.B. Ekreem, A.G. Olabi, T. Prescott, A. Rafferty and M.S.J. Hashmi. 2007. An overview of magnetostriction, its use and methods to measure these properties. Journal Of Materials Processing Technology, 191, 1-3, pp96-101.
• A.G. Olabi, Edmund Morris and M.S.J. Hashmi. 2007. Metallic tube type energy absorbers: A synopsis. Thin-walled Structures, 45, 7-8, pp706-726.
• A.G. Olabi, K.Y. Benyounis, M.S.J. Hashmi. 2007. Application of response surface methodology in describing the residual stress distribution in CO2 laser welding of AISI304. Strain, 43, 1, pp37-46.
• J.H. Abboud, K.Y. Benyounis, A.G. Olabi and M.S.J. Hashmi. 2007. Laser surface treatments of iron-based substrates for automotive application. Journal Of Materials Processing Technology, 182, 1-3, pp427-431.
• A.G. Olabi, G. Casalino, K.Y. Benyounis and M.S.J. Hashmi. 2006. An ANN and Taguchi algorithms integrated approach to the optimization of CO2 laser welding. Advances In Engineering Software, 37, 10, pp643-648.
• Edmund Morris, A.G. Olabi and M.S.J. Hashmi. 2006. Analysis of nested tube type energy absorbers with different indenters and exterior constraints. Thin-walled Structures, 44, 8, pp872-885.
• E. M. Anawa and A. G. Olabi,. 2006. Effects of Laser Welding Conditions on Toughness of Dissimilar Welded Components. Applied Mechanics And Materials, 5-6, , pp375-380.
• M.D. Islam, A.G. Olabi and M.S.J. Hashmi. 2006. Feasibility of multi-layered tubular components forming by hydroforming and finite element simulation. Journal Of Materials Processing Technology, 174, 1-3, pp394-398.
• E.Morris, A.G.Olabi and M.S.J.hashmi. 2005. Experimental and numerical analysis of the static lateral compression of tube type energy absorbers with different indenters. 59, , pp505-510.
• Edmund Morris, A.G. Olabi and M.S.J. Hashmi. 2005. Plastic response of Nested Systems under static and dynamic loading conditions using FE and Experimental techniques. Applied Mechanics And Materials, 3-4, , pp377-382.
• K. Y. Benyounis, A.G. Olabi and M. S. J Hashmi. 2005. Residual Stresses Prediction for CO2 laser Butt- welding of AISI304 Stainless Steel. Applied Mechanics And Materials, 3-4, , pp125-130.
• K.Y. Benyounis, O.M.A. Fakron, J.H. Abboud, A.G. Olabi and M.J.S. Hashmi. 2005. Surface melting of nodular cast iron by Nd-YAG laser and TIG. Journal Of Materials Processing Technology,
• K.Y. Benyounis, A.G. Olabi and M.S.J. Hashmi. 2005. Optimizing the laser-welded butt joints of medium carbon steel using RSM. Journal Of Materials Processing Technology, 164-165, , pp986-989.
• K.Y. Benyounis, A.G. Olabi and M.S.J. Hashmi. 2005. Effect of laser welding parameters on the heat input and weld-bead profile. Journal Of Materials Processing Technology, 164-165, , pp978-985.
• M. Ricco, S. De Matthaeis and A. G. Olabi. 2004. Simulation of the magnetic properties for common rail electro-injector. Journal Of Materials Processing Technology, 155-156, , pp1611-1615.
• A.G.Olabi and M.S.Hashmi. 1998. Effects of the stress relief conditions on a martensite welded components. Journal Of Materials Processing Technology, 77, , pp216-225.
• A.G.Olabi and M.S.Hashmi. 1996. Stress relief procedures for low carbon steel (1020) welded components. Journal of Materials Processing Technology. Journal Of Materials Processing Technology, 56, , pp552-562.
• A.G.Olabi and M.S.Hashmi. 1996. The microstructure and mechanical properties of low carbon steel welded components after the application of PWHTs. Journal Of Materials Processing Technology, 56, , pp88-97.
• A.G.Olabi and M.S.Hashmi. 1995. The effect of post weld heat treatment on the mechanical properties and residual stresses mapping in welded structural steel. Journal Of Materials Processing Technology, 55, , pp117-122.
• A.G.Olabi and M.S.Hashmi. 1993. Effects of post weld heat treatment soaking temperature on mechanical properties and residual stresses for martensite stainless steel welded components. Journal Of Materials Processing Technology, 38, , pp387-398.

Selected Books

• A.G. Olabi & K. Benyounis. Environment & Clean Technologies, DCU, 2012.
• A.G. Olabi and K. Benyounis. Sustainable Energy Developments, DCU, 2012.
• M. Dassisti, A.G.Olabi and M. Chimienti. Environmental Protection in the New Era, Biblioteca Brucoli Press, 2010.
• A.G.Olabi, S.Naher, M.Acquaviva. Environmental Protection Beyond 2020, Glasnevin Publishing, 2009.
• A.G.Olabi, S.Naher, M.Dassisti. Sustainable Energy Beyond 2020, Glasnevin Publishing, 2009.
• Abdul Ghani Olabi & Dermot Brabazon. International Symposium for Engineering Education, ISEE-08, Dublin City University, 2008.
• Abdul Ghani Olabi & Dermot Brabazon. International Symposium for Engineering Education, ISEE-07, Dublin City University, 2007.
• Abdul Ghani Olabi. Vehicles Alternative Fuel Systems and Environmental Protection, Dublin City University, 2006.
• Abdul Ghani Olabi. Vehicles Alternative Fuel Systems and Environmental Protection, DCU, 2004.
• A.G.Olabi and M.S.J.Hashmi. Advances in Materials and Processing Technology, DCU, 2003.

Selected Chapters

• A. Baroutaji and A.G. Olabi. 2012. Analysis of the Effect of the Elliptical Ratio in Tubular Energy Absorbers Under Quasi-Static Conditions. Materials with Complex Behaviour II , pp323-336.
• M. Rehan, J.E. Coleman and A.G. Olabi. 2011. Design, Development and Validation of a Novel Mechanical Occlusion Device for Transcervical Sterilization . Electrical Engineering and Applied Computing , pp609-622.
• E. Morris, A. G. Olabi, M. S. J. Hashmi and M. D. Gilchrist. 2007. Analysis of the Effect of the Elliptical Ratio in Tubular Energy Absorbers Under Quasi-Static Conditions . Experimental Analysis of Nano and Engineering Materials and Structures, pp801-802.

• A.A. Alghamdi, A.G. Olabi, NOVEL DESIGN CONCEPT OF MAGNETO RHEOLOGICAL DAMPER IN SQUEEZE MODE, 15th International Conference on Experimental Mechanics, 22-JUL-12 - 27-JUL-12, Porto-Portugal, 2607-1 - 2607-16
• F. Alfarjani, A. K. Mohamed, K. Y. Benyounis, A.G. Olabi, MODELING ANAEROBIC DIGESTION PROCESS FOR GRASS SILAGE AFTER BEATING TREATMENT USING DESIGN OF EXPERIMENT (DOE), In: Ibrahim Dincer ed.GCGW-2012, 08-JUL-12 - 12-JUL-12, Istanbul,Turkey, 281 - 289
• L. Ekpeni, A.G. Olabi, A CHANGE IN THE TRANSPORTATION NEEDS TODAY, A BETTER FUTURE FOR TOMORROW ¿ CLIMATE CHANGE REVIEW., In: Ibrahim Dincer ed.GCGW-2012, 08-JUL-12 - 12-JUL-12, Istanbul,Turkey, 1414 - 1423
• A. Mohamed, F. Alfarjani, A.G. Olabi, BEATING TREATMENT TO ENHANCE DIGESTIBILITY OF FRESH GRASS, In: Ibrahim Dincer ed.GCGW-2012, 08-JUL-12 - 12-JUL-12, Istanbul,Turkey, 260 - 268
• M. Hasanuzzaman, A. G. Olabi, EFFECT OF NUCLEATION TEMPERATURE AND TIME ON CRYSTALLIZATION BEHAVIOR OF ZIRCONIA/ ZIRCON ADDED BOROSILICATE GLASS, ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS,, 24-JUN-12 - 28-JUN-12, Venice, Italy, 1 - 8
• M.E. Montingelli, S. Tedesco, M. Dassisti And A. G. Olabi, Review Of Mechanical And Physical Biomass Pretreatment To Increase The Biogas Yield, 5th International Conference on Sustainable Energy & Environmental Protection, 05-JUN-12 - 08-JUN-12, Dublin-Ireland, 47 - 53
• A.M. Oladoye, J. Carton And A.G. Olabi, An Overview Of The Role Of The Deposition Process On Coated Metallic Bipolar Plates For Proton Exchange Membrane Fuel Cells, 5th International Conference on Sustainable Energy & Environmental Protection, 05-JUN-12 - 08-JUN-12, Dublin-Ireland, 275 - 280
• A. K. M. Aboderheeba, F. Alfarjani, A. G. Olabi, The Relationship Between Degree Of Beating And Biogas Production From Maize Silage Anaerobically Digested After Beating Treatment, 5th International Conference on Sustainable Energy & Environmental Protection, 05-JUN-12 - 08-JUN-12, Dublin-Ireland, 107 - 112
• L.E.N. Ekpeni, K.Y. Benyounis And A.G. Olabi, Gap Sizes Effects On Homogenized Yeast And Its Efficiency On Biogas Production, 5th International Conference on Sustainable Energy & Environmental Protection, 05-JUN-12 - 08-JUN-12, Dublin-Ireland, 83 - 88
• S. Tedesco, M.E. Montingelli, K.Y. Benyounis, A.G. Olabi, Mechanical Pre-Treatment Effects Investigation On Biogas Yields From Different Species Of Macroalgal Biomass, 5th International Conference on Sustainable Energy & Environmental Protection, 05-JUN-12 - 08-JUN-12, Dublin-Ireland, 17 - 22
• M. Dassisti, M. Foglia, A.G. Olabi, Manufacturing Sustainability Of Wood T-Joints For Naval Subtructures: A New Process With Different Adhesives, SEEP 2012, 05-JUN-12 - 08-JUN-12, Dublin-Ireland, 406 - 413
• H. Achour and A.G. Olabi, Driving Cycle Developments And Their Impacts On Energy Consumption Of Transportation, SEEP 2012, 05-JUN-12 - 08-JUN-12, Dublin-Ireland, 14 - 19
• L. Ekpeni and A.G.Olabi, Biogas Improvement through Yeast Use in High Pressure Homogenizer (HPH), SEM2011, 26-OCT-11 - 28-OCT-11, Zagreb, Croatia, 7 - 13
• A. Alaswad, K. Y. Benyounis and A.G.Olabi, Investigation of the production cost minimization in bi- layered tube hydroforming process design, IMC-28, 30-AUG-11 - 01-SEP-11, Dublin-Ireland
• A. Mohamed, F. Alfarjani, K. Benyounis, T. Prescott and A.G. Olabi, , Mechanical Pre-treatment to Enhance Anaerobic Digestion Process, ECOS 2011, 04-JUL-11 - 07-JUL-11, Novi Sad, Serbia, 3573 - 3582
• F. Alfarjani, A. Mohamed, K. Benyounis, T. Prescott and A.G. Olabi, Application of mechanical pre-treatment to produce methane from maize, ECOS 2011, 04-JUL-11 - 07-JUL-11, Novi Sad, Serbia, 3595 - 3602
• S. Tedesco and A.G. Olabi , Review of Lignocellulosic Biomass as Bioenergy Sources with Applications to Anaerobic Digestion and CHP, In: Umberto Dessideri ed.International Conference on Applied Energy, 16-MAY-11 - 18-MAY-11, Perugia-Italy, 513 - 522
• M.Rehan, J.Coleman, A.G.Olabi, Novel Mechanical Occlusion Device for Transcervical Sterilization, World Congress on Engineering 2010, 30-JUN-10 - 02-JUL-10, Imperial College, London, UK, 566 - 571
• V. Lawlor, G. Zauner, C. Hochenauer, A. Mariani, S. Griesser, J. Carton, K. Klein, S. Kuehn, A. Olabi, S. Cordiner, D. Meissner, G. Buchinger, , The Use of CFD to Investigate the Properties of MT-SOFCs with Various Fuel and Oxidant Manifolding Techniques., In: Prof. Michele Dassisti ed.SEEP 2010, 29-JUN-10 - 02-JUL-10, Bari-Italy, 387 - 399
• M. Aly, M.S.J. Hashmi, A.G. Olabi, M. Messeiry, E.F. Abadir, A.I. Hussain , Effect of Alkaline Treatment on behaviour of Flax Fiber Reinforced Cement Mortar , SEEP 2010, 29-JUN-10 - 02-JUL-10, Bari-Italy, 121 - 130
• A.G.Olabi and A.Alaswad, An Analytical Comparison of Single and Bi-layered Tube Hydroforming Systems Using Finite Element Method, 10th International Conference on Numerical Methods in Industrial Forming Processes, 13-JUN-10 - 17-JUN-10, Pohang, South Korea, 1047 - 1054
• V.Lawlor, G.Zauner, C.Hochenauer, S.Griesser, D. Meissner, G.Buchinger, A.Mariani, S.Cordiner, J.Carton, A.G.Olabi, S.Kuehn Katrin Klein, A Study to Investigate Methods to Measure the Temperature of a MT-SOFC in a High Temperature Wind Tunnel, European Fuel Cell Technology and Applications Conf., 15-DEC-09 - 18-DEC-09, Rome-Italy
• H. Achour, A.G. Olabi and A. Marashly, Development of a practical driving cycle for simulation of car emissions: a case study in Aleppo city, Syria, In: Prof. N.Lior ed.5th Dubrovnik Conference on Sustainable Development of Energy Water and Environment Systems, 29-SEP-09 - 03-OCT-09, Dubrovnik, Croatia
• V.Lawlor, G.Zauner, A.Mariani, C.Hochenauer, J.Carton, S.Griesser, K.Klein, S.Kuehn, D.Meissner, A.G.Olabi, S.Cordiner, G.Buchinger, Micro-tubular SOFC: Towards a power pack for automotive and auxiliary power supply use, Elevent Grove Fuel Cell Symposiun, 22-SEP-09 - 24-SEP-09, Queen Elizabeth II Conference Centre, Westminster, London, UK
• A.Alaswad and A.G.Olabi, A NUMERICAL STUDY OF THE EFFECT OF PROCESS PARAMETERS ON BI-LAYERED TUBE HYDROFORMING, 26th International Conference, 02-SEP-09 - 04-SEP-09, Dublin-Ireland, 295 - 302
• V.Lawlor, A.Mariani, C.Hochenauer, G.Zauner, S.Griesser, D.Meissner, A.G.Olabi, S.Cordiner, G. Buchinger, -¿ A micro tubular SOFC and stack testing apparatus to provide a means of developing highly efficient pertable and axuilary power packs for the future, SEEP 2009, 12-AUG-09 - 15-AUG-09, Dublin-Ireland, 2 - 7
• M.Dassisti , A.G. Olabi and S. Tedesco, PROCESS OPTIMISATION FOR RE-PLASTIC COMPONENTS VIA STATISTICAL EXPERIMENTATION, 3rd International Conference on Sustainable Energy and Environmental Protection, 12-AUG-09 - 15-AUG-09, Dublin-Ireland, 345 - 349
• J.G. Carton & A.G. Olabi, DEVELOPING ENERGY STORAGE & A FUEL CELL SYSTEM IN CONJUNCTION WITH RENEWABLE WIND ENERGY SYSTEMS TO PROVIDE CONSISTENT SUSTAINABLE ENERGY SUPPLY, 3rd International Conference on Sustainable Energy and Environmental Protection, 12-AUG-09 - 15-AUG-09, Dublin-Ireland, 14 - 19
• H. Achour and A.G. Olabi, Comparison between measured and estimated vehicle emissions from road transport, In: Dr A.G.Olabi ed.3rd International Conference on Sustainable Energy & Environmental Protection, 12-AUG-09 - 15-AUG-09, Dublin-Ireland, 24 - 29
• M.Rehan and A.G.Olabi, Parametric design optimization by integrating CAD systems and optimization tools, Third Manufacturing Engineering Society International Conference, MESIC-09, 17-JUN-09 - 19-JUN-09, Alcoy, Spain, 681 - 692
• V.Lawlor, C.Hochenauer, G.Zauner, S Griesser, A.G.Olabi, D.Meissner, G.Buchinger, Towards an optamised Micro-tubular SOFC reactor core design, 3rd Symposium of Austrian Universities of Applied Sciences, 15-APR-09 - 16-APR-09, Fachhochschule Kärnten, Villach, Austria, 288 - 293
• H. Achour and A.G.Olabi, Estimating on-road emissions using a special driving cycle for Dublin, International Conference on Simulation Based Engineering and Sciences, 16-OCT-08 - 17-OCT-08, Venice, Italy
• A.Clarke, A.G.Olabi, T. Prescott, A. Rafferty, K.Benyounis, Finite Element Analysis of Homogeniser, Ansys/Enginsoft Conference on Simulation Based Engineering and Science, 16-OCT-08 - 17-OCT-08, Venice, Italy
• N. B. Ekreem, A. Rafferty, S. A. Mazlan, T. Prescott, and A.G. Olabi, Prediction of Strong Magnetic Fields Using Computational FEMM Modelling, International Conference on Simulation Based Engineering and Sciences, 16-OCT-08 - 17-OCT-08, Venice, Italy
• S.A. Mazlan, A. Issa, H.A. Chowdhury and A.G. Olabi,, Tensile Stress-Strain Relationships of Magnetorheological Fluids under Various Factors, the European Materials Research Society (E-MRS) Fall Meeting, 15-SEP-08 - 19-SEP-08, Warsaw University of Technology, Poland
• A. Clarke and A.G. Olabi, Bologna Treaty from the view of students and graduates, In: Dr D. Brabazon and Dr A.G. Olabi ed.ISEE 2008, 08-SEP-08 - 10-SEP-08, Dublin-Ireland
• J. G. Carton & A. G. Olabi, OPTIMISATION OF A PROTON EXCHANGE MEMBRANE FUEL CELL: FLOW PLATE DESIGN & TESTING, 25th International Manufacturing Conference, 03-SEP-08 - 05-SEP-08, Dublin-Ireland, 511 - 518
• M. Rehan and A. G. Olabi, AUTOMATED CAD SYSTEM BASED DESIGN OPTIMIZATION METHODOLOGY, 25th International Manufacturing Conference, 03-SEP-08 - 05-SEP-08, Dublin-Ireland, 377 - 385
• H. A. Eltawahni and A. G. Olabi, HIGH POWER LASER CUTTING OF DIFFERENT MATERIALS- A LITERATURE REVIEW, 25th International Manufacturing Conference, 03-SEP-08 - 05-SEP-08, Dublin-Ireland, 81 - 86
• E. M. Anawa and A. G. Olabi, Optimization of Tensile strength of Aluminum / Steel Dissimilar Welding Components, 25th International Manufacturing Conference, 03-SEP-08 - 05-SEP-08, Dublin-Ireland, 113 - 126
• H.A.Chowdhury and A.G.Olabi, A finite element approach for the implementation of magnetostrictive material Terfenol-D in CNG fuel injection actuation, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008, 03-AUG-08 - 06-AUG-08, New York City, NY, United states, 749 - 756
• S.A. Mazlan, A. Issa and A.G. Olabi, Magnetorheological Fluids Behaviour in Tension Loading Mode, International Conference on Multifunctional Materials and Structures, 28-JUL-08 - 31-JUL-08, Hong Kong, China
• V.Lawlor, C.Hochenauer, G.Buchinger, S.Griesser, A.G.Olabi, D.Meissner, Numerical Simulation and Experimental Validation to Design an Optimised Micro-Tubular Solid Oxide Fuel Cell Reactor, Tagungsband 2. Forschungsforum der Österreichischen Fachhochschulen, 26-MAR-08 - 27-MAR-08, Wels, Austria, 327 - 334
• V.Lawlor, C.Hochenauer, G.Buchinger, S.Griesser, A.G.Olabi, D.Meissner, Towards a micro-tubular SOFC reactor with C.F.D, validation, experiments and a high temperature wind tunnel, 11th annual Sir Bernard Crossland Symposium, 02-MAR-08 - 03-MAR-08, Limerick, Ireland
• J.G. Carton and A.G. Olabi, A Study of the Future Transport Industry; Fuel Cells Versus ICEs, European Fuel Cell Technology and Applications Conf., 11-DEC-07 - 14-DEC-07, Rome-Italy, 187 - 188
• S.A. Mazlan, N.B. Ekreem and A.G. Olabi, An Investigation of the Magnetorheological Fluids in Compression Mode, In: Y. ¿T. Im ed.10th International Conference on Advances in Materials and Processing Technologies, 07-OCT-07 - 11-OCT-07, Daejeon, Korea
• A.G.Olabi, Engineering Programme Structure Requirements for Bologna Compliance, ISEE-2007, 17-SEP-07 - 19-SEP-07, Dublin-Ireland, 35 - 38
• L.F. Elgammudi, A.G. Olabi, K.Y. Benyounis, Effects of Recycling Stages and Moulding Parameters on Yield Strength of Polypropylene, IMC24, 29-AUG-07 - 31-AUG-07, Waterford-Ireland, 109 - 117
• J.G. Carton and A.G. Olabi, Developments of Fuel Cell Technology, IMC24, 29-AUG-07 - 31-AUG-07, Waterford-Ireland, 273 - 280
• S.A. Mazlan and A.G. Olabi, Investigation of the Performance of Magnetorheological Fluid in Squeeze Mode, IMC24, 29-AUG-07 - 31-AUG-07, Waterford-Ireland, 847 - 854
• N- E. M. Anawa and A. G. Olabi, Impact Strength of Dissimilar Laser Welded Joint, IMC24, 29-AUG-07 - 31-AUG-07, Waterford-Ireland, 611 - 619
• N. Ekreem, A.G. Olabi, T. Prescott and A. Rafferty, Design Optimization for Generating a High Static Magnetic Field, IMC24, 29-AUG-07 - 31-AUG-07, Waterford-Ireland, 329 - 336
• S.A. Mazlan, N.B. Ekreem and A.G. Olabi, Mechanical Properties of Magnetorheological Fluids under Compression Mode, In: W. Ostachowicz, J. Holnicki-Szulc and C. M. Soares ed.Smart Structures and Materials, III ECCOMAS Thematic Conference, 09-JUL-07 - 11-JUL-07, Gdansk, Poland
• S.A. Mazlan, N.B. Ekreem and A.G. Olabi, Magnetorheological fluid in squeeze mode under different instantaneous magnetic field, The 10th Magnetism & Magnetic Materials conference, 07-JAN-07 - 11-JAN-07, Biltimore, Maryland-USA
• L.F. Elgammudi, A.G. Olabi and M.S.J. Hashmi, Effects of the Recycling Process on the Marketing of Plastic Materials, IMC 23, 30-AUG-06 - 02-SEP-06, Belfast-N. Ireland, 75 - 82
• K. Y. Benyounis, A.G. Olabi and M. S. J Hashmi, Mechanical Properties, Weld-bead and Cost Universal Approach for CO2 Laser Welding Process Optimization, IMC23, 30-AUG-06 - 02-SEP-06, Belfast-N. Ireland, 233 - 240
• Md.Din Islam, A.G. Olabi and M.S.J. Hashmi, Mechanical Stresses in The Multi Layered T-Branch Hydroforming: Numerical Simulation, IMC23, 30-AUG-06 - 02-SEP-06, Belfast-N. Ireland, 315 - 322
• M Hasanuzzaman, A Rafferty, AG Olabi and T Prescott, Approach for Sintering Nano-Sized Yttria-Stabilized Zirconia, IMC23, 30-AUG-06 - 02-SEP-06, Belfast-N. Ireland, 413 - 426
• E Morris, AG Olabi and MSJ Hashmi, Experimental and Numerical Analysis of Slotted Tube Systems Under Quasi-Static Loading, IMC23, 30-AUG-06 - 02-SEP-06, Belfast-N. Ireland, 323 - 330
• E. M. Anawa, A. G. Olabi and M. S. J. Hashmi, The Application of Taguchi Method to Optimize Dissimilar Laser Welded Components, IMC23, 30-AUG-06 - 02-SEP-06, Belfast-N. Ireland, 241 - 248
• A.G.Olabi, J.H.Abboud, K.A.Abou-El-Hossein and K.Y.Benyounis, Optimising the Multipurpose CNG/LPG Solenoid Actuator Using Response Surface Methodology, In: Dr A.G.Olabi ed.VAFSEP2006, 22-AUG-06 - 25-AUG-06, Dublin-Ireland, 143 - 147
• H.A.Chowdhury and A.G.Olabi, Recent CNG Developments and its Implications for Heavy-Duty Vehicles, In: Dr A.G.Olabi ed.VAFSEP 2006, 22-AUG-06 - 25-AUG-06, Dublin-Ireland, 75 - 89
• Md.Din Islam, A.G. Olabi and M.S.J. Hashmi, Effect of process parameters on the formability of bi-layered tubular component: Experimental work and finite element simulation, Advances in Materials and Processing Technology, 30-JUL-06 - 03-AUG-06, Las Vegas-USA
• E. M. Anawa, A. G. Olabi and M. S. J. Hashmi, Optimization of Ferritic / Austenitic Laser Welded Components, Advances in Materials and Processing Technology, 30-JUL-06 - 03-AUG-06, Las Vegas-USA
• K. Y. Benyounis, A.G. Olabi and M. S. J Hashmi, Optimization of tensile-shear strength of AISI304 lap joint in CO2 laser welding, Advances in Materials and Processing Technology, 30-JUL-06 - 03-AUG-06, Las Vegas-USA
• L.F. Elgammudi, A.G. Olabi and M.S.J. Hashmi, Optimization of the Moulding Process of Recycled Plastic Materials, Advances in Materials and Processing Technology, 30-JUL-06 - 03-AUG-06, Las Vegas-USA
• M.M.Rahman, A.G.Olabi and M.S.J.Hashmi, Finite element modelling of rheological property of curing PMMA bone cement:analysis of cement flow in total hip replacement, Advances in Materials and Processing Technology, 30-JUL-06 - 02-AUG-06, Las Vegas-USA
• A. G. Olabi and H. A. Eltawahni, Finite Element Analysis for Electo-Magnetic Solenoid Used In Medical Devices, Int. Conf on Scientific and Clinical Applications of Magnetic Carriers, 17-MAY-06 - 20-MAY-06, Krems-Austria
• M. Hasanuzzaman, A. Rafferty, A. G. Olabi, T. Prescot, Characterization of Nano-Sized Yttria-Stabilized Zirconia, MED, 22-MAR-06 - 24-MAR-06, DIT-Dublin-Ireland, 477 - 485
• L.F. Elgammudi, A.G. Olabi and M.S.J. Hashmi, Effects of Moulding Parameters on mechanical properties of polypropylene plastic materials,, MED, 22-MAR-06 - 24-MAR-06, DIT-Dublin-Ireland, 96 - 105
• A. Alsebaie, A. G. Olabi, A. Rafferty and T. Prescott, Characterization of Al2O3-ZrO2 composites prepared by traditional powder processing, and colloidal processing methods, ACMS-IV, 4th Arab Congress on material science, 26-SEP-05 - 28-SEP-05, Tripoli-Libya, 390 - 401
• K. Y. Benyounis, A.G. Olabi and M. S. J Hashmi, Microstructure and weld-bead geometry investigation of laser beam welding of AISI304, ACMS-IV, 4th Arab Congress on material science, 26-SEP-05 - 28-SEP-05, Tripoli-Libya, 113 - 119
• K.A.Saeed, A.G.Olabi and M.S.J. Hashmi, JUSTIFYING CIM IMPLEMENTATION IN DEVELOPED AND DEVELOPING COUNTRIES, 4th DAAAM International Conference on Advanced Technologies for Developing Countries , 21-SEP-05 - 24-SEP-05, Slavonski Brod, Croatia
• K.Saeed, A.G.Olabi and M.S.J.Hashmi, Implementation of CIM for Developed and Developing Countries, ICMR-2005, 06-SEP-05 - 08-SEP-05, Cranfield-UK
• Edmund Morris, A.G. Olabi, M.S.J. Hashmi, Post Collapse Response of Nested Tube Systems with Side Constraints, In: John Vickery ed.IMC-22, 31-AUG-05 - 02-SEP-05, Dublin-Ireland, 693 - 700
• K. Y. Benyounis, A. G. Olabi, M. S. J. Hashmi, Estimation of Mechanical Properties of Laser Welded Joints using RSM, In: John Vickery ed.IMC-22, 31-AUG-05 - 02-SEP-05, Dublin-Ireland, 565 - 572
• A.G. Olabi, A. Grunwald, Development of Magneto Rheological Fluid, In: John Vickery ed.IMC-22, 31-AUG-05 - 02-SEP-05, Dublin-Ireland, 551 - 558
• L.F. Elgammudi, A.G. Olabi, M.S.J. Hashmi, A Study- Effect of Recycling Process on the Productivity of Plastic Materials, In: John Vickery ed.IMC-22, 31-AUG-05 - 02-SEP-05, Dublin-Ireland, 755 - 764
• A. M. Abulamosha, A. G. Olabi and M. S. J. Hashmi,, Development of Compressed Natural Gas (CNG) System for Vehicles, TSCE05, 15-APR-05 - 18-APR-05, El-Minia-Egypt, 264 - 272
• K.Y.Benyounis, A.H.Bettamer, A.G.Olabi and M.S.J.Hashmi, Predicting the Impact Strength of Spiral-Welded Pipe Joints In Submerged Arc Welding Of Low Carbon Steel, In: Pat Phelan ed.IMC-21, 01-SEP-04 - 03-SEP-04, Limerick-Ireland, 200 - 207
• M.M.Rahman, A.G.Olabi and M.S.J.Hashmi, Thermal properties of curing acrylic bone cement mixed at different vacuum level, 12th International conference on Experimental Mechanics, 29-AUG-04 - 02-SEP-04, Bari-Italy
• N.M.Zarroug, A.G.Olabi and M.S.J.Hashmi, Elastic-Plastic Behaviour of Mild Steel (En8) At Different Strain Rates Under Combined Tension-Torsion Loading, ICEM12, 29-AUG-04 - 02-SEP-04, Bari-Italy, 599 - 606
• E.P.Morris, A.G.Olabi and M.S.J.Hashmi, FE Simulation and Experimentation of Nested Systems Under Static and Impact Loading Conditions, ICEM12, 29-AUG-04 - 02-SEP-04, Bari-Italy, 196 - 203
• M.T.Cunningham and A.G.Olabi, Developing a Compresses Natural Gas Electro-Injector, In: A.G.Olabi ed.VAFSEP2004, 06-JUL-04 - 09-JUL-04, Dublin-Ireland, 260 - 265
• E.J.Conway, A.G.Olabi, A.Grunwald and W.Krude, Electromagnetic Actuator For A TMD In Automotive Driveline, VAFSEP2004, 06-JUL-04 - 09-JUL-04, Dublin-Ireland
• A.Abulamosha, S.Scally, A.G.Olabi and M.S.J.Hashmi, Strategy of CNG Application in Ireland, In: A.G.Olabi ed.VAFSEP2004, 06-JUL-04 - 09-JUL-04, Dublin-Ireland, 159 - 164
• N.M.Zarroug, A.G.Olabi and M.S.J.Hashmi, Finite Element Simulation of the Deformation Behaviour of Mild Steel Rod Subjected to Combined Torque and Tension, In: Matthew Cotterell ed.IMC20, 03-SEP-03 - 05-SEP-03, CIT-Cork, 679 - 686
• N.M.Zarroug, A.G.Olabi and M.S.J.Hashmi, Mild Steel (En8) Thin-Walled Tube Subjected To Combined Tension-Torsion Loading, In: M.S.J.Hashmi and A.G.Olabi ed.AMPT'03, 08-JUL-03 - 11-JUL-03, Dublin City University, 603 - 607
• M.RICCO, S.De Matthaeis and A.G.Olabi, Electro-Magnetic and structural Modelling For Off- Road Common Rail Application, AMPT'03, 08-JUL-03 - 11-JUL-03, Dublin-Ireland
• A.G.Olabi and M.Ricco, Optimisation of Multi-Purpose Solenoid Actuator Used for Automotive Application, AMPT'01, 18-SEP-01 - 21-SEP-01, Madrid-Spain
• A.G.Olabi and M.S.Hashmi, The optimum condition for post weld heat treatment of welded structural steel component, Advances in Materials and Manufacturing Technology 1995, 08-AUG-95 - 12-AUG-95, Dublin-Ireland
• A.G.Olabi and M.S.Hashmi, Finite element modeling for studying the effects of residual stresses on martensite stainless steel welded component, IMC-11, 31-AUG-94 - 02-SEP-94, Belfast-UK
• A.G.Olabi and M.S.Hashmi, Optimization of post weld heat treatment conditions for martensite stainless steel welded component, SE 94, 07-MAR-94 - 10-MAR-94, Adelaide-Australia
• A.G.Olabi and M.S.Hashmi, The optimum condition for PWHT of welded structural steel component, IMC-10, 08-SEP-93 - 10-SEP-93, Galway-Ireland
• A.G.Olabi and M.S.Hashmi, Review of methods for measuring residual stresses in components, 9th NCMR, 07-SEP-93 - 09-SEP-93, Bath-UK
• A.G.Olabi and M.S.Hashmi, The effect of post weld heat treatment in weld repaired components of AISI410 Materials. Proceedings of international conference of sheet metal, Sheet Metal 92, 07-APR-92 - 09-APR-92, Birmingham-UK