Electronic Engineering

Biographical Details:

Dr. Muhammad Monjur Morshed (BSc Engg., MSc, PhD, MIEI) graduated with a degree (B.Sc) in Metallurgical Engineering from the Bangladesh University of Engineering and Technology (BUET) in 1997. After completion of his M.Sc. degree on Tribological Permormance of Phenolics Based (polymer matrix composite(PMC) materials) Brake Shoe Lining Materials at the same University in 1999, he was awarded as PhD studenship in the schoolof Mechanical and Manufacturing Engingineering, Dublin City University (DCU), Ireland to undertake research on deposit and characterize diamond like carbon (DLC) biocompatible coating and to improve the adhesion of the coating with principal surgical metals and polymer for the application of medical devices and implants. He obtained PhD degree from DCU in 2003. In 2006 he join in electronic industry call creative as functional tester in the group of production of electronic equipments for four months. Since August 2006 he has been working as a postdoctoral researcher in the Nano Plasma Lab (NPL) Group at the School of Electrical and Electronic Engineering and National Centre for Plasma Science and Technology (NCPST). He has been involving in the plasma etching, deposition and characterization of different types of plasma coated films using PVD (Sputtering), CVD, PECVD (Atmospheric and Low pressure plasma) and Vacuum Evaporator methods, and etching and plasma diagnostic using oxford instrument 80plus in clean room.

Research Interests:

Dry etching(plasma etching), Plasma Deposition Technique, Thin films/coatings, nanostructure materials and surface engineering, Material Characterization,Materials aspects of Tribology,Polymer matrix composite (PMC) materials, Modeling and Simulation

Selected Peer Reviewed Journals

• Muhammad Morshed. .
• J. Stopford, D. Allen, O. Aldrian, M.Morshed , J. Wittge , A.N. Danilewsky , P.J. McNally. 2011. Combined use of three-dimensional X-ray diffraction imaging and micro-Raman spectroscopy for the non-destructive evaluation of plasma arc induced damage on silicon wafers. Microelectronic Engineering, 88, , pp64-71.
• M. M. Morshed and S. M. Daniels. 2011. Electron Density and Optical Emission Measurements of SF6/O2 Plasmas for Silicon Etch Processes. accepted for publication in Journal of Plasma Science and Technology,
• M. M. Morshed, M.M. Alam and S. M Daniels. 2011. Moisture Removal from Natural Jute Fibre by Plasma Drying Process. Plasma Chemistry and Processing, DOI 10.1007/s11090-011-9340-1,
• M.M.Morshed, S.M. Daniels and M.S.J.Hashmi. 2011. Finite element method for predicting the cohesive strength of DLC film on 316L stainless steel by four point bend test and validation with experimental results. Advanced Materials Research, 264-265, , pp1823-1831.
• S. Naher, D. Orpen, D. Brabazon, C. R Poulsen, M. M. Morshed. 2011. Effect of Micro-channel Mixing Geometry on Fluid Flow and Mixing. Simulation Modelling Practice And Theory, 19, 4, pp1088-1095.
• D. Allen, J. Stopford, J. Wittge, M.C. Fossati, J. Garagorri, E. Gorostegui-Colinas, P.J. McNally, T. dos Santos Rolo, P. Vagovic, M. M. Morshed, O. Aldrian, A.N.Danilewsky, M.R. Elizalde, D.K. Bowen, and B.K. Tanner. 2010. 3-Dimensional X-Ray Diffraction Imaging Study of Damage to Silicon Wafers. Reports of user experiments at ANKA, , pp75-76.
• M. M. Morshed and S. M. Daniels. 2010. Effect of positive photoresist on silicon etching by reactive ion etching process. Ieee Transactions On Plasma Science, 38, 6, pp1512-1516.
• M. M. Morshed and S. M. Daniels. 2010. Investigation of dry plasma etching of silicon,. Advanced Materials Research, 83-86, , pp1051-1058.
• M. M. Morshed, M. M. Alam and S. M. Daniels. 2010. Plasma treatment of natural jute fibre by RIE 80 plus plasma tool,. Journal of Plasma Science and Technology, Volume 12, Number 3,, , pp325-329.
• S. Naher, D. Orphen, D. Brabazon and M. M. Morshed. 2010. An overview of microfluidic mixing application. Advanced Materials Research, 83-86, , pp931-939.
• M.M.Morshed. 2005. Optical properties of DLC films deposited by the saddle field fast atom neutral beam source. Journal Of Materials Processing Technology, 169, 2, pp219-222.
• M.M. Morshed. 2004. Physical and chemical characteristics of commercially available brake lining materials: A comparative study. Journal Of Materials Processing Technology, 155-156, , pp1422-1427.
• M.M.Morshed. 2003. , Stress and adhesion in DLC coatings on 316L stainless steel deposited by a neutral beam source. Journal Of Materials Processing Technology, 143-144, , pp922-926.
• M.M.Morshed. 2003. Pre-treatment of substrates for improved adhesion of diamond like carbon films on surgically implantable metals deposited by saddle field neutral beam source. Surface And Coatings Technology, 174-175, , pp579-583.
• M.M.Morshed. 2003. DLC films deposited by a neutral beam source: adhesion to biological implant metal. Surface And Coatings Technology, 169-170, , pp254-257.
• M.M.Morshed. 2003. Effect of surface treatment on the adhesion of DLC film 316L stainless steel. Surface And Coatings Technology, 163-164, , pp541-545.
• M.M.Morshed. 2001. Adhesion properties of diamond-like coated orthopaedic biomaterials, Diamond and Related Materials. Diamond And Related Materials, 10, 3-7, pp1098-1102.
• M.M. Morshed and A.S.M.A. Haseeb. 1999. Characteristics of some available polymer based automobile brake shoe lining materials, Journal of the Institute of Engineers, Bangladesh, Mechanical Eng. Div., Vol. ME 27 (1-2). , pp26-31.

• , , , - ,
• Jennifer Stopford, Ken Horan, David Allen, Andreas Danilewsky, Muhammad Morshed and Patrick McNally, Prevention of Si Wafer Breakage Via Non-destructive Evaluation of Plasma Arc Induced Damage. MRS Fall Meeting, 2009. , , - ,
• Jennifer Stopford, Arthur Henry, David Allen, Oswald Aldrian, Dionysios Manessis, Nick Bennett, Muhammad Morshed, Ken Horan, Jochen Wittge, Andreas Danilewsky, Aidan Cowley, Patrick Mcnally, Novel Applications of X-Ray Diffraction Imaging (XRDI) in the Non-Destructive Imaging of Strain and Defects in Semiconductors, International Conference on Materials for Advance Technology (ICMAT 2011), 26-JUN-11 - 01-JUL-11, Singapore
• D. Allen, J. Stopford, J. Wittge, M.C. Fossati, J. Garagorri, E. Gorostegui¿Colinas, P.J. McNally, M.M. Morshed, O. Aldrien, A.N. Danilewsky, M.R. Elizalde, D. Jacques, R. Bytheway, D.K. Bowen(c) and B.K. Tanner, Three-Dimensional X-Ray Diffraction Imaging of Damage to Silicon Wafers, 10th Biennial Conference on High Resolution X-Ray Diffraction and Imaging(XTOP), 20-SEP-10 - 23-SEP-10, University of Warwick (UK)
• M. M. Morshed, M. M. Alam and S. M. Daniels, Effect of plasma treatment on environmental friendly natural jute fibre by oxford instrument 80 plus plasma tool, 3rd International Conference on Sustainable Energy and Environmental Protection (SEEP-2009), 12-AUG-09 - 15-AUG-09, Dublin City University, Ireland, 319 - 323
• M. M. Alam and M. M. Morshed, Natural Jute fibre is an Environmental Friendly and Biodegradable Product, 3rd International Conference on Sustainable Energy & Environmental Protection, 11-AUG-09 - 15-AUG-09, Dublin City University, Ireland, 162 - 167
• M. M. Morshed, S.K.Karkari and S. Daniels,, 18th Annual Conference of the Irish Plasma Beam and Processing, Process diagnostic using a microwave hairpin resonance probe with photoresist samples under treatment in a RIE oxford instrument 80 plus plasma tool,, 08-MAY-08 - 09-MAY-08, Dublin City University, Dublin, Ireland, pp13 -
• O J Cahill, B Quilty, S Daniels, V J Law, M M Morshed, Atmospheric plasma disruption of bacteria, In: Jean-Paul Mosnier ed.Plasma Processes for Biomedical Appliactions, 24-MAY-07 - 24-MAY-07, Dublin City University,Dublin, Ireland
• M. M. Morshed and A. S. M. A. Haseeb, Physical and chemical characteristics of commercially available brake lining materials: A comparative study, International Conference on Advances in Materials and Processing Technologies, 08-JUL-03 - 11-JUL-03, Dublin City University,Dublin,Ireland, 1424 - 1427
• M. M. Morshed, D. C. Cameron, B. P. McNamara, and M. S. J. Hashmi, Implant Metal Coatings: DLC's Adhesive Value!, Bioengineering in Ireland (8) and The 16th Meeting of the Northern Ireland Biomedical Engineering Society - Joint conference, 26-JAN-02 - 27-JAN-02, Sligo, Republic of Ireland, 77 - 77
• M. M. Morshed, B. P. McNamara, D. C. Cameron and M. S. J. Hashmi, Stress and adhesion in DLC coatings on 316L stainless steel deposited by a neutral beam source, International Conference on Advance materials Processing Technologies (AMPT 01), 18-SEP-01 - 21-SEP-01, Universidad Carlos III Madrid, Leganes, Spain, 1973 - 1978
• M. M. Morshed, D. C. Cameron, B. P. McNamara, and M. S. J. Hashmi, Adhesion of DLC films deposited by a neutral beam source to biological implant metals, 11th Annual Conference of the Irish Plasma and Beam Processing Group in conjunction with the 10th Symposium on Fusion Research in Ireland, 06-SEP-01 - 07-SEP-01, Dublin City University, Dublin, Ireland
• B. P. McNamara, M. M. Morshed and H. Murphy, Adhesion properties of DLC coated orthopaedic biomaterials, 4th Annual Sir Bernard Crossland Symposium and Postgraduate Workshop, 06-DEC-00 - 07-DEC-00, University College of Dublin, Dublin, Ireland, 146 - 147
• M. M. Morshed, Halen Murphy and Brian P. McNamara, Improving Design Performance of Orthopaedic Biomaterials Through Application of DLC Coatings, Royal Irish Academy, National committee for Engineering Sciences, Engineering Design in an Academic Environment, 12-OCT-00 - 13-OCT-00, Academy house, 19 Dawson St. Dublin2, Ireland
• M. M. Morshed, M. A. Rahman and M. A. Islam, A comparative wear study on traditional and modified heat treated carbon steel, Annual Paper Meet, 05-NOV-98 - 07-NOV-98, Chittagong, Bangladesh, 487 - 492