Mechanical and Manufacturing Engineering

Selected Peer Reviewed Journals

• Hasan M, Stokes J, Looney L and Hashmi MSJ. 2012. Deposition and Characterization of HVOF Thermal Sprayed Functionally Graded Coatings Deposited onto a Lightweight Material. Journal Of Materials Engineering And Performance, 18, 1, pp66-69.
• Abdul Aleem,B.J.; Hashmi,M.S.J. and Yilbas,B.S. 2011. Laser controlled melting of pre-prepared inconel 718 alloy surface. Optics And Lasers In Engineering, 49, 11, pp1314-1319.
• Abdul Aleem,B.J.; Hashmi,M.S.J.; Yilbas,B.S. 2011. Laser surface treatment of high-speed steel: Presence of TiC particles at the surface. Surf.Interface Anal., 2011,
• Al Askandarani, A.; Hashmi,M.S.J.; Yilbas,B.S. 2011. Coating produced by deposition of nanoparticles blended wires. Advanced Materials Research, 264-265, , pp1476-1481.
• Al-Mana,O.; Hashmi,M.S.J.; Yilbas,B.S. 2011. Laser gas assisted nitriding and TiN coating of Ti-6Al-4V alloy, Advanced Materials Research. 264-265, , pp421-426.
• Al-Taha,Z.Y.; Hashmi,M.S.J.; Yilbas,B.S.Y. ,. 2011. HVOF coating of Inconel 625 blended with WC: Fracture toughness measurement. Advanced Materials Research, 264-265, , pp1972-1981.
• Aly,M.; Hashmi, M.S.J.; Olabi,A.G.; Messeiry,M.; Hussain, A.I.. 2011. Effect of nano clay particles on mechanical, thermal and physical behaviours of waste-glass cement mortars. Materials Science And Engineering A,
• Morshed,M.M.; Daniels,S.M.; Hashmi,M.S.J.,. 2011. Finite element method for predicting the cohesive strength of DLC film on 316L stainless steel by four point bend test and validation with experimental results. Advanced Materials Research, 264-265, , pp1823-1831.
• Abubakar,T.; Rahman,M.; Dowling,D.P.; Stokes,J. and Hashmi,M.S.J. 2010. Mechanical performance of the annealed NiTi Shape Memory Alloy coating onto 316L stainless bio-steel. Defect and Diffusion Forum, 297-301, , pp365-369.
• Abubakar,T.; Rahman,M.; Dowling,D.P.; Stokes,J.; and Hashmi,M.S.J.,. 2010. Adhesion performance of TiN coating with amorphous NiTi alloy interlayer onto 316L stainless biosteel deposited by sputtering process, Surface Engineering. 26, 7, pp499-505.
• Al Askandarani,A.; Hashmi,M.S.J.; Yilbas,B.S. 2010. ARC Spraying of nano-structured wire on carbon steel: Examination of coating microstructures. Aip Conference Proceedings Series, , pp1383-1388.
• Al-Anazi D, Hashmi MSJ, Yilbas BS. 2010. High-velocity oxy-fuel thermally sprayed CoNiCrAlY coatings on Ti-6Al-4V alloy: high cycle fatigue properties of coating. Proceedings Of The Institution Of Mechanical Engineers, Part A,
• Al-Anazi D, Hashmi MSJ, Yilbas BS, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE. 2010. High-velocity oxy-fuel thermally sprayed CoNiCrAlY coatings on Ti-6Al-4V alloy: high cycle fatigue properties of coating. Proceedings Of The Institution Of Mechanical Engineers, Part A,
• Al-Shehri,Y.A.; Hashmi, M.S.J.; Yilbas, B.S. 2010. HVOF coatings of diamalloy 2002 and diamalloy 4010 onto steel: Tensile and bending response of coatings. Aip Conference Proceedings Series, 1315, , pp1347-1352.
• Aly,M.; Hashmi,M.S.J.; Olabi,A.G.; Messeiry,M.,. 2010. Durability of waste glass flax fiber reinforced mortar. Aip Conference Proceedings Series, 1315, , pp241-246.
• Haider,J.; Hashmi,M.S.J. 2010. New generation of MoSx based solid lubricant coatings: Recent developments and applications. Aip Conference Proceedings Series, 1315, , pp1365-1370.
• Hasan M, Stokes J, Looney L and Hashmi MSJ. 2010. Effect of spray parameters on residual stress build-up of HVOF sprayed aluminium/tool-steel functionally graded coatings. Surface And Coatings Technology, 202, , pp4006-4010.
• Hasan M, Stokes J, Looney L, et al. 2010. Deposition and Characterization of HVOF Thermal Sprayed Functionally Graded Coatings Deposited onto a Lightweight Material. Journal Of Materials Engineering And Performance, 18, 1, pp66-69.
• Hasan M, Stokes J, Looney L, et al. 2010. Effect of spray parameters on residual stress build-up of HVOF sprayed aluminium/tool-steel functionally graded coatings. Surface And Coatings Technology, 202, , pp4006-4010.
• Hashmi M.S.J. 2010. . International Journal Of Mechanical Sciences, 52, 9, pp1093-1100.
• Hashmi, MSJ. 2010. Characterization and Performance Evaluation of Zinc Oxide Varistor Blocks Processed by Latex Binders. Journal Of The American Ceramic Society,
• J. Haider and M.S.J. Hashmi. 2010. Improving the deposition rate of multicomponent coating by controlling substrate table rotation in a magnetron sputtering process. Advanced Materials Research, 83-86, , pp977-984.
• Kelleher MC and Hashmi MSJ. 2010. The effect of vibratory milling on the powder properties of zinc oxide varistors. Journal Of Materials Processing Technology, 1-3, , pp645-650.
• Kelleher MC, Hashmi MSJ. 2010. The effect of vibratory milling on the powder properties of zinc oxide varistors. Journal Of Materials Processing Technology, 201, 1-3, pp645-650.
• MSJ Hashmi. 2010. Characterization and Performance Evaluation of Zinc Oxide Varistor Blocks Processed by Latex Binders. Journal Of American Academy Of Business, Cambridge,
• M. Aly, M.S.J. Hashmi, A.G. Olabi, M. Messeiry, E.F. Abadir and A.I. Hussain. 2010. Effect of colloidal nano-silica on the mechanical and physical behaviour of waste-glass cement mortar. Materials And Design, 33, , pp127-135.
• Benyounis,K.Y.; Olabi,A.G. and Hashmi,M.S.J. 2009. Mechanical properties, weld bead and cost universal approach for CO2 laser welding process optimisation. International Journal Of Computational Materials Science And Surface Engineering, 1-2, pp99-109.
• Hasan M, Stokes J, Looney L and Hashmi MSJ. 2009. Deposition and Characterization of HVOF Thermal Sprayed Functionally Graded Coatings Deposited onto a Lightweight Material. Journal Of Materials Engineering And Performance, 18, , pp66-69.
• Karim, A.N.M.; Begum,S. and Hashmi,M.S.J. 2009. Performance and failure during energy testing of zinc oxide varistor processed from different powder size fraction and passivation thickness. International Journal of Mechanical and Materials Engineering 2, 5, pp175-181.
• Morris,E.; Olabi,A.G. and Hashmi,M.S.J. 2009. Experimental and numerical analysis of slotted tube systems under quasi-static loading. International Journal Of Computational Materials Science And Surface Engineering, 2, 1-2, pp137-145.
• Akter S, Hashmi MSJ, POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING. 2008. Polymer flow analysis in a tapered bore coating unit: Combination of shear and extensional flow. Polymer, 47, 5, pp515-523.
• Boudi AA, Hashmi MSJ, Yilbas BS, INDUSTRIAL LUBRICATION AND TRIBOLOGY. 2008. Fatigue testing of Inconel-625 coatings on carbon and stainless steel after one and three weeks of exposure to aqueous electrolytic solution. Industrial & Engineering Chemistry Research, 60, 1, pp24-30.
• Haider J, Rahman M, Hashmi MSJ, et al. 2008. Investigating the wear characteristics of engineered surfaces: low-temperature plasma nitriding and TiN+MoSx hard-solid lubricant coating. Journal Of Materials Science, 43, 10, pp3368-3376.
• Hasan M, Stokes J, Looney L, et al. 2008. Design and optimisation of a multi-powder feed system for the HVOF deposition process. Surface And Coatings Technology, 202, 14, pp3215-3220.
• Issa A, Brabazon D, Hashmi MSJ. 2008. 3D transient thermal modelling of laser microchannel fabrication in lime-soda glass. Journal Of Materials Processing Technology,
• Olabi AG, Morris E, Hashmi MSJ, et al. 2008. Optimised design of nested oblong tube energy absorbers under lateral impact loading. International Journal Of Impact Engineering, 35, 1, pp10-26.
• Olabi AG, Morris E, Hashmi MSJ, et al. 2008. Optimised design of nested circular tube energy absorbers under lateral impact loading. International Journal Of Mechanical Sciences, 50, 1, pp104-116.
• Ekreem NB, Olabi AG, Prescott T, et al. 2007. An overview of magnetostriction, its use and methods to measure these properties. Journal Of Materials Processing Technology, 191, 1-3, pp96-101.
• Gavin GP, McGuinness GB, Dolan F, et al. 2007. Performance characteristics of a therapeutic ultrasound wire waveguide apparatus. International Journal Of Mechanical Sciences, 49, 3, pp298-305.
• Morris E, Olabi AG, Hashmi MSJ. 2007. Lateral crushing of circular and non-circular tube systems under quasi-static conditions. Journal Of Materials Processing Technology, 191, 1-3, pp132-135.
• Olabi AG, Benyounis KY, Hashmi MSJ. 2007. Application of response surface methodology in describing the residual stress distribution in CO2 laser welding of AISI304. 43, 1, pp37-46.
• Olabi AG, Morris E, Hashmi MSJ. 2007. Metallic tube type energy absorbers: A synopsis. Thin-walled Structures, 45, 7-8
• Rahman M, Duggan P, Dowling DP, et al. 2007. Continuously deposited duplex biomedical coatings. 201, 9-11
• Rahman M, Reid I, Duggan P, et al. 2007. Structural and tribological properties of the plasma nitrided Ti-alloy biomaterials: Influence of the treatment temperature. Surface And Coatings Technology, 201, 9-11, pp4865-4872.
• Galietti U Pappalettere C Hashmi MSJ. 2000. High velocity oxy-fuel coating technique: evaluation of residual stresses. International Journal Of Materials & Product Technology, 15,, pp20-33.
• Mac Donald BJ Hashmi MSJ. 2000. Finite element simulation of bulge forming of a cross-joint from a tubular blank. Journal Of Materials Processing Technology, 103,, pp333-342.
• Yilbas BS Hashmi MSJ. 2000. Laser treatment of Ti-6A1-4V alloy prior to plasma nitriding. Journal Of Materials Processing Technology, 103,, pp304-309.
• Ali ARM Hashmi MSJ. 1999. Theoretical and experimental results of the elastic-plastic response of a circular rod subjected to non-proportional combined torque and tension loadings. Proceedings Of The Institution Of Mechanical Engineers, Part A, 213,, pp251-261.
• Akter S Hashmi MSJ. 1999. Analysis of polymer flow in a conical coating unit: a power law approach. Progress In Organic Coatings, 37,, pp15-22.
• Chowdhury AKMS Cameron DC Hashmi MSJ. 1999. Adhesion of carbon nitride thin films on tool steel. Surface And Coatings Technology, 119, , pp46-53.
• Ahmed M Hashmi MSJ. 1999. Finite element simulation of bulge forming of an elbow of box section from circular tube. Journal Of Materials Processing Technology, 93,, pp410-418.
• Akter S Hashmi MSJ. 1999. Experimental results of high speed wire coating using a combined hydrodynamic unit. Journal Of Materials Processing Technology, 93,, pp224-229.
• Hashim J Looney L Hashmi MSJ. 1999. Metal matrix composites: production by the stir casting method. Journal Of Materials Processing Technology, 93,, pp1-7.
• Ismail MY Hashmi MSJ. 1999. The state of quality management in the Irish manufacturing industry. Total Quality Management, 10,, pp853-862.
• Tan JC Looney L Hashmi MSJ. 1999. Component repair using HVOF thermal spraying. Journal Of Materials Processing Technology, 93,, pp203-208.
• Chowdhury AKMS Cameron DC Hashmi MSJ Gregg JM. 1999. Evidence for continuous areas of crystalline beta-C3N4 in sputter-deposited thin films. Journal Of Materials Research, 14,, pp2359-2363.
• Chowdhury AKMS Cameron DC Hashmi MSJ. 1999. Bonding structure in carbon nitride films: variation with nitrogen content and annealing temperature. Surface And Coatings Technology, 112, , pp133-139.
• Murphy MJ Monaghan J Tyrrell M Walsh R Cameron DG Chowdhury AKMS Monclus M Hashmi MSJ. 1999. Penning type magnetron sputtering source and its use in the production of carbon nitride coatings. Journal Of Vacuum Science & Technology A-vacuum Surface, 17,, pp62-69.
• Akter S Hashmi MSJ. 1998. Plasto-hydrodynamic pressure distribution in an exponentially converging coating unit. International Journal Of Materials & Product Technology, 13,, pp384-399.
• Ismail MY El Baradie M Hashmi MSJ. 1998. Quality management in the manufacturing industry practice vs performance. Computers & Industrial Engineering, 35,, pp519-522.
• Chowdhury AKMS Cameron DC Hashmi MSJ. 1998. Vibrational properties of carbon nitride films by Raman spectroscopy. Thin Solid Films, 332,, pp62-68.
• Yilbas Z Hashmi MSJ. 1998. Simulation of weight pruning process in backpropagation neural network for pattern classification: A self-running threshold approach. Computer Methods In Applied Mechanics And Engineering, 166,, pp233-246.
• Ismail MY Hashmi MSJ. 1998. Empirical study into quality initiatives implementation order. Total Quality Management, 9,, ppS128-S129.
• Ahmed M Hashmi MSJ. 1998. Finite-element analysis of bulge forming applying pressure and in-plane compressive load. Journal Of Materials Processing Technology, 77,, pp95-102.
• Akter S Hashmi MSJ. 1998. Modelling of the pressure distribution within a hydrodynamic pressure unit: Effect of the change in viscosity during drawing of wire coating. Journal Of Materials Processing Technology, 77,, pp32-36.
• Akter S Hashmi MSJ. 1998. Formation and remelting of a solid polymer layer on the wire in a polymer melt chamber. Journal Of Materials Processing Technology, 77,, pp314-318.
• Alauddin M Mazid MA El Baradi MA Hashmi MSJ. 1998. Cutting forces in the end milling of Inconel 718. Journal Of Materials Processing Technology, 77,, pp153-159.
• Begum S Duff A Puyane R Hashmi MSJ. 1998. Evaluation of latex binder in the processing of electronic ceramic powder. Journal Of Materials Processing Technology, 77,, pp108-114.
• Hamouda AMS Hashmi MSJ. 1998. Testing of composite materials at high rates of strain: advances and challenges. Journal Of Materials Processing Technology, 77,, pp327-336.
• Hashmi MSJ. 1998. A personal glimpse of the life and works of William Johnson: a researcher of materials processing technology and an engineering educator. Journal Of Materials Processing Technology, 77,, pp1-8.
• Huda MD Puyane R El Baradie MA Hashmi MSJ. 1998. Failure modelling for ZnO varistors. Journal Of Materials Processing Technology, 77,, pp273-277.
• Karim ANM Puyane R El-Baradie MA Hashmi MSJ. 1998. Holding time in the pressing cycle and its influence on the performance characteristics of zinc oxide varistor discs. Journal Of Materials Processing Technology, 77,, pp54-58.
• Kennedy DM Hashmi MSJ. 1998. Methods of wear testing for advanced surface coatings and bulk materials. Journal Of Materials Processing Technology, 77,, pp246-253.
• Nwir MA Hashmi MSJ. 1998. Hydro-dynamic pressure distribution in tapered stepped parallel bore and complex geometry pressure units: experimental results. Journal Of Materials Processing Technology, 77,, pp294-299.
• Olabi AG Hashmi MSJ. 1998. Effects of the stress-relief conditions on a martensite stainless-steel welded component. Journal Of Materials Processing Technology, 77,, pp216-225.
• Hashmi MSJ Pappalettere C Ventola F. 1998. Residual stresses in structures coated by a high velocity oxy- fuel technique. Journal Of Materials Processing Technology, 75,, pp81-86.
• Huda D El Baradie MA Hashmi MSJ Puyane R. 1998. Study of electrical characteristics and microstructure of zinc oxide varistor through rate-controlled sintering. Journal Of Materials Science, 33,, pp271-278.
• Yilbas Z Hashmi MSJ. 1998. An optical method and neural network for surface roughness measurement. Optics And Lasers In Engineering, 29,, pp1-15.
• Alauddin M ElBaradie MA Hashmi MSJ. 1997. Prediction of tool life in end milling by response surface methodology. Journal Of Materials Processing Technology, 71,, pp456-465.
• Kennedy DM Hashmi MSJ. 1997. The influence of linear velocity on the wear behaviour of thermal sprayed coatings under dynamic abrasion test conditions. Surface And Coatings Technology, 96, , pp345-352.
• Chowdhury AKMS Monclus M Cameron DC Gilvarry J Murphy MJ Barradas NP Hashmi MSJ. 1997. The composition and bonding structure of CNx films and their influence on the mechanical properties. Thin Solid Films, 308,, pp130-134.
• Mohammed MA Hashmi MSJ Yilbas BS. 1997. A study into effects of CO2 laser melting of nitrided Ti-6Al-4V alloy. Journal Of Materials Engineering And Performance, 6,, pp642-648.
• Ahmed M Hashmi MSJ. 1997. Estimation of machine parameters for hydraulic bulge forming of tubular components. Journal Of Materials Processing Technology, 64,, pp9-23.
• Hamouda AMS Hashmi MSJ. 1997. High speed impact of elastic-plastic work hardening material into a rigid boundary. Journal Of Materials Processing Technology, 64,, pp189-197.
• Hashmi MSJ. 1997. AMPT '96 Dublin City University Dublin Ireland. International Journal Of Mechanical Sciences, 39,, pp135-135.
• Ahmed M Hashmi MSJ. 1997. Comparison of free and restrained bulge forming by finite element method simulation. Journal Of Materials Processing Technology, 63,, pp651-654.
• Akter S Hashmi MSJ. 1997. High speed nylon coating of wire using a plasto-hydrodynamic pressure unit. Journal Of Materials Processing Technology, 63,, pp453-457.
• Murphy MJ Monaghan J Cameron DC Hashmi MSJ. 1996. Magnetic field in a commercial sputter magnetron. Frontiers For Engineering Materials,, pp287-294.
• Kennedy DM Hashmi MSJ. 1996. Test rig design and experimental results of coated systems under impact abrasion conditions. Surface And Coatings Technology, , pp493-497.
• Hamouda AMS Sulaiman S Hashmi MSJ. 1996. Fast upsetting of circular cylinders of aluminium metal matrix composites: Experimental results and numerical analysis. Journal Of Materials Processing Technology, 60,, pp723-727.
• Alauddin M ElBaradie MA Hashmi MSJ. 1996. Modelling of cutting force in end milling Inconel 718. Journal Of Materials Processing Technology, 58,, pp100-108.
• AlTounsi A Puyane R Hashmi MSJ. 1996. Rate-controlled shrinkage of ZnO varistors. Journal Of Materials Processing Technology, 56,, pp891-896.
• Hamouda AMS Hashmi MSJ. 1996. Modelling the impact and penetration events of modern engineering materials: Characteristics of computer codes and material models. Journal Of Materials Processing Technology, 56,, pp847-862.
• Hamouda AMS Hashmi MSJ. 1996. Mechanical properties of aluminium metal matrix composites under impact loading. Journal Of Materials Processing Technology, 56,, pp743-756.
• Haque MM Hashmi MSJ. 1996. Investigation on microstructure of medium carbon steel deformed at strain rates of up to 10(5) per second at -30 degrees C to 235 degrees C. Journal Of Materials Processing Technology, 56,, pp119-125.
• Hashmi MSJ. 1996. Special issue containing papers presented at AMPT '93 - International Conference on Advances in Material & Processing Technologies held at Dublin City University Dublin Ireland in August 1993 - Preface. Journal Of Materials Processing Technology, 56,, ppR15-R15.
• Helali M Hashmi MSJ. 1996. Production of free standing objects by high velocity oxy-fuel (HVOF) thermal spraying process. Journal Of Materials Processing Technology, 56,, pp431-438.
• Huda D ElBaradie MA Hashmi MSJ. 1996. Modelling for the compressive strength of Al-6061/SiC MMCs. Journal Of Materials Processing Technology, 56,, pp452-462.
• Kola PV Daniels S Cameron DC Hashmi MSJ. 1996. Magnetron sputtering of TiN protective coatings for medical applications. Journal Of Materials Processing Technology, 56,, pp422-430.
• Olabi AG Hashmi MSJ. 1996. Stress relief procedures for low carbon steel(1020) welded components. Journal Of Materials Processing Technology, 56,, pp552-562.
• Olabi AG Hashmi MSJ. 1996. The microstructure and mechanical properties of low carbon steel welded components after the application of PWHTs. Journal Of Materials Processing Technology, 56,, pp88-97.
• Alauddin M ElBaradie MA Hashmi MSJ. 1995. Tool-life testing in the end milling of Inconel 718. Journal Of Materials Processing Technology, 55,, pp321-330.
• Crombie D Hashmi MSJ. 1995. Simulation and assessment of the leakage characteristics and suitability of Rhone-Poulenc's 'ISCEON 69' blends as refrigerants. Journal Of Materials Processing Technology, 55,, pp315-320.
• Alauddin M ElBaradie MA Hashmi MSJ. 1995. Computer-aided analysis of a surface-roughness model for end milling. Journal Of Materials Processing Technology, 55,, pp123-127.
• Hashmi MSJ. 1995. Conference of the Irish Manufacturing Committee on Advanced Manufacturing Technology held at University College Dublin Ireland - Preface. Journal Of Materials Processing Technology, 55,, ppR14-R14.
• Olabi AG Hashmi MSJ. 1995. The effect of post-weld heat-treatment on mechanical-properties and residual-stresses mapping in welded structural steel. Journal Of Materials Processing Technology, 55,, pp117-122.
• Alauddin M Choudhury IA ElBaradie MA Hashmi MSJ. 1995. Plastics and their machining: A review. Journal Of Materials Processing Technology, 54,, pp40-46.
• ALTOUNSI A PUYANE R HASHMI MSJ. 1995. CONTROL OF WEIGHT-LOSS USING CLOSED FEED BACK LOOP DURING THE FIRING PROCESS OF ZNO VARISTORS. Silicates Industriels, 60,, pp159-161.
• KENNEDY DM HELALI M HASHMI MSJ. 1994. DYNAMIC ABRASION RESISTANCE OF COATINGS APPLIED TO ENGINEERING MATERIALS. Surface And Coatings Technology, 68, , pp477-481.
• KOLA PV CAMERON DC HASHMI MSJ. 1994. MAGNETRON-SPUTTERED CARBON NITRIDE FILMS. Surface And Coatings Technology, 68, , pp188-193.
• HUDA D ELBARADIE MA HASHMI MSJ. 1994. ANALYTICAL STUDY FOR THE STRESS-ANALYSIS OF METAL-MATRIX COMPOSITES. Journal Of Materials Processing Technology, 45,, pp429-434.
• HUDA D ELBARADIE MA HASHMI MSJ. 1994. DEVELOPMENT OF A HARDNESS MODEL FOR MMCS (AL/AL2O3). Journal Of Materials Processing Technology, 44,, pp81-90.
• HASHMI MSJ. 1994. 8TH CONFERENCE OF THE IRISH-MANUFACTURING-COMMITTEE-ON- ADVANCED-MANUFACTURING-TECHNOLOGY - UNIVERSITY-OF-ULSTER NORTHERN-IRELAND - PREFACE. Journal Of Materials Processing Technology, 43,, ppR7-R7.
• HU W HASHMI MSJ LIU P. 1994. STUDY OF METAL FLOW IN EXTRUSION FORGING OF RECTANGULAR BILLETS. Journal Of Materials Processing Technology, 43,, pp51-59.
• HASHMI MSJ HAMOUDA AMS. 1994. DEVELOPMENT OF A ONE-DIMENSIONAL CONSTITUTIVE EQUATION FOR METALS SUBJECTED TO HIGH-STRAIN RATE AND LARGE-STRAIN. Journal Of Strain Analysis For Engineering Design, 29,, pp117-127.
• KARIM MZ CAMERON DC HASHMI MSJ. 1994. PLASMA DIAGNOSTICS IN THE GROWTH OF C-BN FILMS. Diamond And Related Materials, 3,, pp551-554.
• ZHANG JY HU WP HASHMI MSJ. 1993. SUPER-SUBCOOLING WITH R12 AND R22 REFRIGERATION PLANTS USING RECIPROCATING-COMPRESSORS. Applied Energy, 45,, pp157-166.
• CAMERON DC KARIM MZ HASHMI MSJ. 1993. PROPERTIES OF MIXED-PHASE BN FILMS DEPOSITED BY RF PACVD. Thin Solid Films, 236,, pp96-102.
• KARIM MZ CAMERON DC HASHMI MSJ. 1993. CHARACTERIZATION OF MIXED-PHASE BN THIN-FILMS DEPOSITED BY PLASMA CVD. Surface And Coatings Technology, 60, , pp502-505.
• MURPHY MJ CAMERON DC KARIM MZ HASHMI MSJ. 1993. MAGNETIC-FIELDS IN MAGNETRON SPUTTERING SYSTEMS. Surface And Coatings Technology, 57, , pp1-5.
• ALTOUNSI A HASHMI MSJ. 1993. EFFECT OF SINTERING TEMPERATURE ON THE DENSIFICATION SHRINKAGE AND COMPRESSIVE STRENGTH OF STAINLESS-STEEL 300 SERIES. Journal Of Materials Processing Technology, 37,, pp551-557.
• ALTOUNSI A PUYANE R HASHMI MSJ. 1993. COMPACTION OF ALLGOMERATED ZINC-OXIDE POWDER. Journal Of Materials Processing Technology, 37,, pp543-550.
• DIKO F HASHMI MSJ. 1993. A FINITE-ELEMENT SIMULATION OF NON-STEADY-STATE METAL-FORMING PROCESSES. Journal Of Materials Processing Technology, 38,, pp115-122.
• HUDA D ELBARADIE MA HASHMI MSJ. 1993. METAL-MATRIX COMPOSITES - MANUFACTURING ASPECTS .1. Journal Of Materials Processing Technology, 37,, pp513-528.
• HUDA D ELBARADIE MA HASHMI MSJ. 1993. METAL-MATRIX COMPOSITES - MATERIALS ASPECTS .2. Journal Of Materials Processing Technology, 37,, pp529-541.
• OLABI AG HASHMI MSJ. 1993. EFFECTS OF POST-WELD HEAT-TREATMENT SOAKING TEMPERATURE ON THE MECHANICAL-PROPERTIES AND RESIDUAL-STRESSES OF A MARTENSITE STAINLESS-STEEL WELDED COMPONENT. Journal Of Materials Processing Technology, 38,, pp387-398.
• KARIM MZ CAMERON DC HASHMI MSJ. 1992. EFFECT OF DEPOSITION PARAMETERS ON THE FORMATION OF CUBIC BN FILMS DEPOSITED BY PLASMA-ASSISTED CHEMICAL VAPOR-DEPOSITION FROM NONTOXIC MATERIAL. Surface And Coatings Technology, 55, , pp355-359.
• BHATTI MT HASHMI MSJ. 1992. SIMULATION OF A MICRO-COMPUTER-CONTROLLED ROBOTIC HAND FOR WIRE ELECTRODISCHARGE MACHINING APPLICATIONS. Journal Of Materials Processing Technology, 33,, pp383-396.
• HASHMI MSJ. 1992. SPECIAL ISSUE - 7TH CONFERENCE OF THE IRISH-MANUFACTURING- COMMITTEE-ON-ADVANCED-MANUFACTURING-TECHNOLOGY - DUBLIN IRELAND AUGUST 29-31 1990 - PREFACE. Journal Of Materials Processing Technology, 33,, ppR3-R3.
• HU W HASHMI MSJ. 1992. THE EFFECT OF THE PROPERTIES OF THE MATERIAL ON THE PLANE- STRAIN DEFORMATION OF RECTANGULAR BILLETS BETWEEN GROOVED AND FLAT PLATENS. Journal Of Materials Processing Technology, 33,, pp419-428.
• TUNIO MA HASHMI MSJ. 1992. FEASIBILITY OF MANUFACTURING POLYMER-COATED COMPOSITE WIRE ROPES USING PLASTOHYDRODYNAMIC TECHNIQUE. Journal Of Materials Processing Technology, 33,, pp367-374.
• FLEMING MG HASHMI MSJ. 1992. A COMPARISON OF MAGNETRON SPUTTERED AND ARC EVAPORATED PVD THIN-FILMS FOR WEAR APPLICATIONS IN MULTIPOINT CUTTING TOOLS. Journal Of Materials Processing Technology, 32,, pp481-488.
• HASHMI MSJ. 1992. PLASMA COATING OF SURFACES AND HOW TO ASSESS AND AVOID DEFECTS. Journal Of Materials Processing Technology, 32,, pp407-419.
• AHERN MJ HASHMI MSJ. 1992. THE ROLE OF DEPOSITION PARAMETERS AND ADHESION EFFECTS ON THE FORMATION OF TIN FILMS ON HIGH-SPEED STEEL. Journal Of Materials Processing Technology, 31,, pp349-361.
• AHERN M HASHMI MSJ. 1992. COMPARISON OF OPERATING-CONDITIONS AND TIN FILMS PRODUCED FROM BOTH DIRECTLY AND INDIRECTLY COOLED DC MAGNETRON TARGETS. Surface And Coatings Technology, 50, , pp249-254.
• KARIM MZ CAMERON DC MURPHY MJ HASHMI MSJ. 1991. PLASMA DEPOSITION OF CUBIC BORON-NITRIDE FILMS FROM NONTOXIC MATERIAL AT LOW-TEMPERATURES. Surface And Coatings Technology, 49, , pp416-421.
• ALTOUNSI A HASHMI MSJ. 1991. EFFECT OF SINTERING TEMPERATURE ON HIGH-STRAIN RATE PROPERTIES OF IRON-POWDER COMPACTS. Journal De Physique Iii, 1,, pp203-208.
• HASHMI MSJ. 1991. 6TH CONFERENCE OF THE IRISH-MANUFACTURING-COMMITTEE ON ADVANCED MANUFACTURING TECHNOLOGY - DUBLIN IRELAND AUGUST 31 SEPTEMBER 1 1989 - PREFACE. Journal Of Materials Processing Technology, 26,, pp95-95.
• LAMB RE HASHMI MSJ. 1991. POLYMER COATING OF SUPERFINE WIRE - A NEW TECHNIQUE TO ENSURE QUALITY. Journal Of Materials Processing Technology, 26,, pp197-205.
• BHATTI MT HASHMI MSJ. 1990. SOFTWARE AND HARDWARE DESIGN OF A ROBOTIC MANIPULATOR FOR THE MANUFACTURE OF COMPLEX SHAPED DIES. Journal Of Materials Processing Technology, 24,, pp473-483.
• HASHMI MSJ. 1990. THEORY AND EXPERIMENT ON PLANE-STRAIN DEFORMATION OF RECTANGULAR BILLETS BETWEEN FLAT AND GROOVED PLATENS. Journal Of Materials Processing Technology, 24,, pp13-22.

Selected Books

• M.S.J. Hashmi, S. Mridha and S. Naher, Eds. Advances in Materials and Processing Technologies II, Advances in Materials Research, 2011 Part II, Volumes 264 ¿ 265, 2011.
• M.S.J. Hahsmi, B.S. Yilbas and S. Naher. Advances in Materials Processing and Technologies, Advanced Materials Research, Part 2, Volume 85-86, 2010, Selected papers from the Advances in Materials Processing Technologies Conference 2008, Trans Tech Publisher, Springer,, 2010.
• M.S.J. Hashmi, B.S. Yilbas and S. Naher. Advances in Materials Processing and Technologies, Advanced Materials Research, Part 1,Selected papers from the Advances in Materials Processing Technologies Conference 2008, 83-84, Trans Tech Publisher, Springer,, 2010.

• , , , - ,
• Abdul Aleem B Jabbar, Hashmi MSJ and Yilbas Bekir Sami,, Laser Surface controlled melting of pre-prepared Inconel 718 alloy surface, 14th International Conferences on Advances in Materials and Manufacturing Technologies 2011, 13-SEP-11 - 16-SEP-11, Hilton Hotel Convention Centre, Istanbul, Turkey, 190 -
• Albara Askandarani, Hashmi M.S.J. and Bekir Yilbas, ARC spraying of nanostructured wires on steel surfaces: Influence of coating thickness on microstructure and fracture toughness, 14th International Conferences on Advances in Materials and Manufacturing Technologies 2011, 13-SEP-11 - 16-SEP-11, Hilton Hotel Convention Centre, Istanbul, Turkey, 190 -
• Yasser Alshehri, Hashmi M.S.J., Yilbas B.S., HVOF Coating of metallic surfaces using different powders: fracture toughness measurement of resulting surfaces,, 14th International Conferences on Advances in Materials and Manufacturing Technologies 2011, 13-SEP-11 - 16-SEP-11, Hilton Hotel Convention Centre, Istanbul, Turkey, 303 -
• Julfikar Haider and M S J Hashmi, New generation of MoSx based solid lubricant coatings: recent developments and applications, 13th International Conferences on Advances in Materials and Manufacturing Technologies 2010,, 24-OCT-10 - 27-OCT-10, Paris, France.
• M.C.Kelleher and M.S.J. Hashmi, Effect on the processing characteristics of zno varistors produced using vibratory milling route, 13th International Conferences on Advances in Materials and Manufacturing Technologies 2010, 24-OCT-10 - 27-OCT-10, Paris, France.
• Y.A. Al-Shehri, M.S.J. Hashmi and B.S. Yilbas, HVOF coating of diamalloy 2002 and diamalloy 4010 onto steel: tensile and three point bending response of coatings, 13th International Conferences on Advances in Materials and Manufacturing Technologies 2010, 24-OCT-10 - 27-OCT-10, Paris, France.
• Al Askandarani, M.S.J. Hashmi and B.S. Yilbas, Plasma arc sparying of nano-particles blended wires onto steel surface: metallurgical examinations, 13th International Conferences on Advances in Materials and Manufacturing Technologies 2010, 24-SEP-10 - 27-SEP-10, Paris, France
• M. Aly,M. Messeiry, E.F.Abadir, A. I. Hussain, A.G. Olabi and M.S.J. Hashmi, Durability of waste glass flax fiber reinforced mortar, 13th International Conferences on Advances in Materials and Manufacturing Technologies 2010, 24-SEP-10 - 27-SEP-10, Paris, France.
• Julfikar Haider and M.S.J. Hashmi, Improving the deposition rate of multicomponent coating by controlling substrate table rotation in a magnetron sputtering processes, 11th International Conference in Materials Processing and Technologies, 02-NOV-09 - 05-NOV-09, Manama, Bahrain
• Y.A. Al-Shehri, M.S.J. Hashmi B.S. Yilbas,, HVOF COATING OF DIAMALLOY 2002 AND 4010 ON CARBON STEEL SHEETS: MICROSTRUCTURE EXAMINATION, 12th International Conference in Materials Processing and Technologies, 26-OCT-09 - 29-OCT-09, Legend Hotel, Kuala Lumpur, Malaysia
• O. Al-Mana, M.S.J. Hashmi and B.S. Yilbas, LASER GAS ASSISTED NITRIDING AND TiN COATING OF Ti-6Al-4V ALLOY, 12th International Conference in Materials Processing and Technologies, 26-OCT-09 - 29-OCT-09, Legend Hotel, Kuala Lumpur, Malaysia
• Al Askandarani, M.S.J. Hashmi and B.S. Yilbas, COATING PRODUCED BY DEPOSITION OF NANOPARTICLES BLENDED WIRES, 12th International Conference in Materials Processing and Technologies, 26-SEP-09 - 29-SEP-09, Legend Hotel, Kuala Lumpur, Malaysia
• Z.Y. Al-Taha, M.S.J. Hashmi and B.S.Y. Yilbas , HVOF COATING OF INCONEL 625 BLENDED WITH WC: FRACTURE TOUGHNESS MEASUREMENT, 12 th International Conference in Materials Processing and Technologies, 26-SEP-09 - 29-SEP-09, Legend Hotel, Kuala Lumpur, Malaysia
• Md.K. Al-Mamun, J. Stokes, M.S.J Hashmi,, Designing of an Integrated Semi Automated Powder Feed Device to Produce Functionally Graded Materials (FGM) using the HVOF Thermal Spray Process,, International Thermal Spray Conference ITSC 2008: Crossing Borders, 02-JUN-08 - 04-JUN-08, Maastricht, The Netherlands
• Md.K. Al-Mamun, J. Stokes, M.S.J Hashmi,, Production of Functionally Graded Materials Using the HVOF Thermal Spray Process, SURFENG 2007, Surface Engineering Conference & Exposition Workshop 2007,, 06-SEP-07 - 07-SEP-07, Dublin, Ireland, 18 - 26
• Md.K. Al-Mamun, J. Stokes, M.S.J Hashmi,, Designing and Integrating a semi automated Powder Feed Device to Produce Functionally Graded Materials (FGM) using the HVOF Thermal Spray Process, International Manufacturing Conference, 08-AUG-07 - 08-AUG-07, Waterford, Ireland, 1139 - 1145
• M.I. Shahidul, M.S.J. Hashmi.,, A Matrix of Zakat- Entrepreneurship-Technology for Marginal Poor: Few Case Studies in Bangladesh Economy, Conference paper, Islamic development Bank, 2007., 07-JUL-07 - 07-JUL-07, Dhaka-Bangladesh
• Julfikar Haider, Mahfujur Rahman, M. S. J. Hashmi and Mohammed Sarwar, coating., Wear behaviour of low temperature plasma nitrided surface and hard-solid lubricant, 2nd International Conference on Surfaces, Coatings and Nanostructured Materials (NanoSmat 2007), 07-JUL-07 - 07-JUL-07, Algarve, Portugal
• Jamel Othman and MSJ Hashmi, The implementation of Advanced Manufacturing Technologies and Computer Integrated Manufacturing in Malaysian Manufacturing Industries, Proceeding of The International Conference On Science & Technology (ICSTIE06), 08-DEC-06 - 09-DEC-06, UiTM Penang, Malaysia
• Mustafa A., Hashmi M.S.J., Yilbas B.S. and Sunar M., Thermal Stress Analysis in Annular Duct Resembling Gas Turbine Transition Piece: Effect of Mass Flow Rate Variation, International Conferences on Advances in Material Processing Technology, 30-JUL-06 - 02-AUG-06, Las Vegas, USA
• Al-Anazi, Hashmi M.S.J., Yilbas B.S. and Sunar M., HVOF Sprayed AMDRY 995 Powders onto Ti-6 Al-4 V Alloy:Tensile Properties, International Conferences on Advances in Material Processing Technology, 30-JUL-06 - 02-AUG-06, Las Vegas, USA
• Yilbas B.S. and Hashmi M.S.J., Laser nitriding of Ti-6Al-4V alloy¿, Conference on Advances in Material Processing Technology, International Conference on Advances in Material Processing Technology, 30-JUL-06 - 02-AUG-06, Las Vegas, USA
• Q. Murtaza, M. Ardhaoui, M.S.J Hashmi and J. Stokes, Computation Fluid Dynamic Analysis of the Production of Bio-Thermal Spray Powders, International Conference on Materials-Energy-Design, 15-MAR-06 - 16-MAR-06, , 18 - 25
• H.Y. Al-Fadhli, J. Stokes, M.S.J Hashmi and B.S. Yilbas, Modelling of HVOF Coating Deposit Applied over Different Metallic Surfaces and Tested in Highly Corrosive Environments, 11th Middle East Corrosion Conference, 26-FEB-06 - 01-MAR-06, , 550 - 557