Eduroam - Manual Install for MacOS 10.4 | Information Systems & Services

Create an eduroam profile in MacOS 10.4

N.B. if you have difficulty seeing the detail in any of the images then right click and select view image.

1. Click on the wireless icon (in the menu bar at the top of the screen). Select 'Open Internet Connect'....
2. Click 802.1X (this button might not be immediately visible in which case you'll have to click on the rightmost arrow icon to see it, as shown in this image).



3. Click the Configuration drop pull-down menu and select Edit Configurations...



4. Click + in bottom left corner of window and enter the details as per the diagram below.
   N.B. You must enter your DCU Novell/AD network username and password in the form of : username@dcu.ie e.g. bloggsj22@dcu.ie
   The password is NOT your e-mail password it is your network password used for such systems as Portal pages, Moodle, Novell, AD etc.



5. Select PEAP and click Configure...
   Enter anonymous@dcu.ie



6. Click OK
7. To make eduroam your preferred network, within the left pane drag the eduroam entry to the top of the list of networks/configurations.
8. OK

Your wireless client is now configured to avail of eduroam and should connect automatically when at a site where the eduroam service is available.Using eduroam for the first time. When you use your new Eduroam profile for the first time you will be required to verify the details of the authentication server you are talking to, as follows:

1. A "Verify Certificate" pop-up window will display on your screen.
   Click Continue