The purpose built Torque-Tension machine can apply torque and tension to a specimen in the grippers using two different motors, one to apply torque the other tension. The machine is controlled by a PC and Labview software. The machine was designed to carry a maximum tensile load of 100kN and a torque of 200Nm.

Room No: JG19

For operational manuals please click on the links below:

• Torque Tension Operating Manual
• MOOG Tension anfd Torsion Motor Manuals
• MOOG Motor Controller Tension and Torsion Manual
• RDP Amplifier interface Manual
• Dual channel Amplifier for load and torque Manual
• Dual channel Amplifier for LVDT Manual
• Strain gauge Amplifier Manual
• The Angular Position Transducer Manual
• The LVDT
• Tension Loadcell Manual
• Torque Loadcell Manual
• DAQ Device AT-AO-6 Manual
• DAQ Device AT-MIO-16E Manual

For service:

Moog Gmbh
Industrial division
Hanns-Klemim St.28
D-7030 Boblingen

Telephone: 07031 6220
Fax: 0731 622 191

Website: Moog.com


RDP
Grove Street,
Heath Town,
Wolverhampton,
WV10 0PY
United Kingdom

Telephone: +44 (0) 1902 457512
Fax: +44 (0) 1902 452000

Website:www.rdpelectronics.com


Penny & Giles Position Sensors limited
Somerford Road
Christchurch Dorset
BH233RS
United Kingdom

Telephone: (0425) 278821


National Instruments Corporate Headquarters
6504 Bridge Point Parkway
Austin,
TX 78730-5039

Telephone: (512) 794-0100
Fax: (800) 328-2203 (512) 794-5678

Website: ni.com


NOREAR TORQUE TOOLS LTD.,
Banbury,
OX16 7XJ,
England

Telphone: (0295) 270333
Fax: 0295 269864

Website: Norbar.com